Lines Matching refs:FLASH

12 * UEFI Shell built into FLASH image
13 * UEFI Linux operating system boot support from Micro SD FLASH
26     - Micro SD FLASH with FAT file system support
66 able to boot the built-in UEFI Shell and Linux from a micro SD FLASH card.  The
112 able to boot the built-in UEFI Shell and Linux from a micro SD FLASH card.  The
248 ## **FLASH Update using DediProg SF100**
252 installed into the FLASH device on the target Galileo development board.  One
266 * **NOTE**: It is recommended that the FLASH image that was shipped with the
267   Galileo development board be read and saved before updating FLASH image.  The
268   command shown below read the FLASH image and saves it to the file
273 * Update FLASH image using either the DediProg SF100 GUI or ```dpcmd.exe```.
285 After the FLASH is updated on Galileo, a serial cable is connected between the
395 Use Dediprog SF100 to update the Galileo development board FLASH image.
485 * Extract the SD Card Linux Image to a FAT formatted Micro SD FLASH device
486 * Install Micro SD FLASH device into Galileo development board
492 all future boots, to auto detect that the Micro SD FLASH device is bootable.
529 * Select **UEFI Misc Device** for the Micro SD FLASH device.
608 Use Dediprog SF100 to update the Galileo development board FLASH image.
631 Use Dediprog SF100 to update the Galileo development board FLASH image.
673 driver for firmware volumes so the DP.EFI command can be run out of the FLASH.
675 Use Dediprog SF100 to update the Galileo development board FLASH image.
679 reboot the Galileo development board.  The first boot after a FLASH update does