/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /* * This header file defines the types and structures that were defined in * ipa. It contains the constant values defined, enums, structures, * messages, and service message IDs (in that order) Structures that were * defined in the IDL as messages contain mandatory elements, optional * elements, a combination of mandatory and optional elements (mandatory * always come before optionals in the structure), or nothing (null message) * An optional element in a message is preceded by a uint8_t value that must be * set to true if the element is going to be included. When decoding a received * message, the uint8_t values will be set to true or false by the decode * routine, and should be checked before accessing the values that they * correspond to. * Variable sized arrays are defined as static sized arrays with an unsigned * integer (32 bit) preceding it that must be set to the number of elements * in the array that are valid. For Example: * uint32_t test_opaque_len; * uint8_t test_opaque[16]; * If only 4 elements are added to test_opaque[] then test_opaque_len must be * set to 4 before sending the message. When decoding, the _len value is set * by the decode routine and should be checked so that the correct number of * elements in the array will be accessed. */ #ifndef IPA_QMI_SERVICE_V01_H #define IPA_QMI_SERVICE_V01_H #define QMI_IPA_IPFLTR_NUM_IHL_RANGE_16_EQNS_V01 2 #define QMI_IPA_IPFLTR_NUM_MEQ_32_EQNS_V01 2 #define QMI_IPA_IPFLTR_NUM_IHL_MEQ_32_EQNS_V01 2 #define QMI_IPA_IPFLTR_NUM_MEQ_128_EQNS_V01 2 #define QMI_IPA_MAX_FILTERS_V01 64 #define QMI_IPA_MAX_FILTERS_EX_V01 128 #define QMI_IPA_MAX_PIPES_V01 20 #define QMI_IPA_MAX_APN_V01 8 #define IPA_INT_MAX ((int)(~0U>>1)) #define IPA_INT_MIN (-IPA_INT_MAX - 1) /* IPA definition as msm_qmi_interface.h */ enum ipa_qmi_result_type_v01 { /* To force a 32 bit signed enum. Do not change or use*/ IPA_QMI_RESULT_TYPE_MIN_ENUM_VAL_V01 = IPA_INT_MIN, IPA_QMI_RESULT_SUCCESS_V01 = 0, IPA_QMI_RESULT_FAILURE_V01 = 1, IPA_QMI_RESULT_TYPE_MAX_ENUM_VAL_V01 = IPA_INT_MAX, }; enum ipa_qmi_error_type_v01 { /* To force a 32 bit signed enum. Do not change or use*/ IPA_QMI_ERROR_TYPE_MIN_ENUM_VAL_V01 = IPA_INT_MIN, IPA_QMI_ERR_NONE_V01 = 0x0000, IPA_QMI_ERR_MALFORMED_MSG_V01 = 0x0001, IPA_QMI_ERR_NO_MEMORY_V01 = 0x0002, IPA_QMI_ERR_INTERNAL_V01 = 0x0003, IPA_QMI_ERR_CLIENT_IDS_EXHAUSTED_V01 = 0x0005, IPA_QMI_ERR_INVALID_ID_V01 = 0x0029, IPA_QMI_ERR_ENCODING_V01 = 0x003A, IPA_QMI_ERR_INCOMPATIBLE_STATE_V01 = 0x005A, IPA_QMI_ERR_NOT_SUPPORTED_V01 = 0x005E, IPA_QMI_ERROR_TYPE_MAX_ENUM_VAL_V01 = IPA_INT_MAX, }; struct ipa_qmi_response_type_v01 { enum ipa_qmi_result_type_v01 result; enum ipa_qmi_error_type_v01 error; }; enum ipa_platform_type_enum_v01 { IPA_PLATFORM_TYPE_ENUM_MIN_ENUM_VAL_V01 = -2147483647, /* To force a 32 bit signed enum. Do not change or use */ QMI_IPA_PLATFORM_TYPE_INVALID_V01 = 0, /* Invalid platform identifier */ QMI_IPA_PLATFORM_TYPE_TN_V01 = 1, /* Platform identifier - Data card device */ QMI_IPA_PLATFORM_TYPE_LE_V01 = 2, /* Platform identifier - Data router device */ QMI_IPA_PLATFORM_TYPE_MSM_ANDROID_V01 = 3, /* Platform identifier - MSM device with Android HLOS */ QMI_IPA_PLATFORM_TYPE_MSM_WINDOWS_V01 = 4, /* Platform identifier - MSM device with Windows HLOS */ QMI_IPA_PLATFORM_TYPE_MSM_QNX_V01 = 5, /* Platform identifier - MSM device with QNX HLOS */ IPA_PLATFORM_TYPE_ENUM_MAX_ENUM_VAL_V01 = 2147483647 /* To force a 32 bit signed enum. Do not change or use */ }; struct ipa_hdr_tbl_info_type_v01 { uint32_t modem_offset_start; /* Offset from the start of IPA Shared memory from which * modem driver may insert header table entries. */ uint32_t modem_offset_end; /* Offset from the start of IPA shared mem beyond which modem * driver shall not insert header table entries. The space * available for the modem driver shall include the * modem_offset_start and modem_offset_end. */ }; /* Type */ struct ipa_route_tbl_info_type_v01 { uint32_t route_tbl_start_addr; /* Identifies the start of the routing table. Denotes the offset * from the start of the IPA Shared Mem */ uint32_t num_indices; /* Number of indices (starting from 0) that is being allocated to * the modem. The number indicated here is also included in the * allocation. The value of num_indices shall not exceed 31 * (5 bits used to specify the routing table index), unless there * is a change in the hardware. */ }; /* Type */ struct ipa_modem_mem_info_type_v01 { uint32_t block_start_addr; /* Identifies the start of the memory block allocated for the * modem. Denotes the offset from the start of the IPA Shared Mem */ uint32_t size; /* Size of the block allocated for the modem driver */ }; /* Type */ struct ipa_hdr_proc_ctx_tbl_info_type_v01 { uint32_t modem_offset_start; /* Offset from the start of IPA shared memory from which the modem * driver may insert header processing context table entries. */ uint32_t modem_offset_end; /* Offset from the start of IPA shared memory beyond which the modem * driver may not insert header proc table entries. The space * available for the modem driver includes modem_offset_start and * modem_offset_end. */ }; /* Type */ struct ipa_zip_tbl_info_type_v01 { uint32_t modem_offset_start; /* Offset from the start of IPA shared memory from which the modem * driver may insert compression/decompression command entries. */ uint32_t modem_offset_end; /* Offset from the start of IPA shared memory beyond which the modem * driver may not insert compression/decompression command entries. * The space available for the modem driver includes * modem_offset_start and modem_offset_end. */ }; /* Type */ /** * Request Message; Requests the modem IPA driver * to perform initializtion */ struct ipa_init_modem_driver_req_msg_v01 { /* Optional */ /* Platform info */ uint8_t platform_type_valid; /**< Must be set to true if platform_type is being passed */ enum ipa_platform_type_enum_v01 platform_type; /* Provides information about the platform (ex. TN/MN/LE/MSM,etc) */ /* Optional */ /* Header table info */ uint8_t hdr_tbl_info_valid; /* Must be set to true if hdr_tbl_info is being passed */ struct ipa_hdr_tbl_info_type_v01 hdr_tbl_info; /* Provides information about the header table */ /* Optional */ /* IPV4 Routing table info */ uint8_t v4_route_tbl_info_valid; /* Must be set to true if v4_route_tbl_info is being passed */ struct ipa_route_tbl_info_type_v01 v4_route_tbl_info; /* Provides information about the IPV4 routing table */ /* Optional */ /* IPV6 Routing table info */ uint8_t v6_route_tbl_info_valid; /**< Must be set to true if v6_route_tbl_info is being passed */ struct ipa_route_tbl_info_type_v01 v6_route_tbl_info; /* Provides information about the IPV6 routing table */ /* Optional */ /* IPV4 Filter table start address */ uint8_t v4_filter_tbl_start_addr_valid; /**< Must be set to true if v4_filter_tbl_start_addr is being passed */ uint32_t v4_filter_tbl_start_addr; /* Provides information about the starting address of IPV4 filter * table in IPAv2 or non-hashable IPv4 filter table in IPAv3. * Denotes the offset from the start of the IPA Shared Mem */ /* Optional */ /* IPV6 Filter table start address */ uint8_t v6_filter_tbl_start_addr_valid; /* Must be set to true if v6_filter_tbl_start_addr is being passed */ uint32_t v6_filter_tbl_start_addr; /* Provides information about the starting address of IPV6 filter * table in IPAv2 or non-hashable IPv6 filter table in IPAv3. * Denotes the offset from the start of the IPA Shared Mem */ /* Optional */ /* Modem memory block */ uint8_t modem_mem_info_valid; /* Must be set to true if modem_mem_info is being passed */ struct ipa_modem_mem_info_type_v01 modem_mem_info; /* Provides information about the start address and the size of * the memory block that is being allocated to the modem driver. * Denotes the physical address */ /* Optional */ /* Destination end point for control commands from modem */ uint8_t ctrl_comm_dest_end_pt_valid; /**< Must be set to true if ctrl_comm_dest_end_pt is being passed */ uint32_t ctrl_comm_dest_end_pt; /* Provides information about the destination end point on the * application processor to which the modem driver can send * control commands. The value of this parameter cannot exceed * 19 since IPA only supports 20 end points. */ /* Optional */ /* Modem Bootup Information */ uint8_t is_ssr_bootup_valid; /**< Must be set to true if is_ssr_bootup is being passed */ uint8_t is_ssr_bootup; /* Specifies whether the modem is booting up after a modem only * sub-system restart or not. This will let the modem driver * know that it doesn't have to reinitialize some of the HW * blocks because IPA has not been reset since the previous * initialization. */ /* Optional */ /* Header Processing Context Table Information */ uint8_t hdr_proc_ctx_tbl_info_valid; /* Must be set to true if hdr_proc_ctx_tbl_info is being passed */ struct ipa_hdr_proc_ctx_tbl_info_type_v01 hdr_proc_ctx_tbl_info; /* Provides information about the header processing context table. */ /* Optional */ /* Compression Decompression Table Information */ uint8_t zip_tbl_info_valid; /* Must be set to true if zip_tbl_info is being passed */ struct ipa_zip_tbl_info_type_v01 zip_tbl_info; /* Provides information about the zip table. */ /* Optional */ /* IPv4 Hashable Routing Table Information */ /** Must be set to true if v4_hash_route_tbl_info is being passed */ uint8_t v4_hash_route_tbl_info_valid; struct ipa_route_tbl_info_type_v01 v4_hash_route_tbl_info; /* Optional */ /* IPv6 Hashable Routing Table Information */ /** Must be set to true if v6_hash_route_tbl_info is being passed */ uint8_t v6_hash_route_tbl_info_valid; struct ipa_route_tbl_info_type_v01 v6_hash_route_tbl_info; /* Optional */ /* IPv4 Hashable Filter Table Start Address */ /** Must be set to true if v4_hash_filter_tbl_start_addr is being passed */ uint8_t v4_hash_filter_tbl_start_addr_valid; uint32_t v4_hash_filter_tbl_start_addr; /** Identifies the starting address of the IPv4 hashable filter table in IPAv3 onwards. Denotes the offset from the start of the IPA shared memory. */ /* Optional */ /* IPv6 Hashable Filter Table Start Address */ /** Must be set to true if v6_hash_filter_tbl_start_addr is being passed */ uint8_t v6_hash_filter_tbl_start_addr_valid; uint32_t v6_hash_filter_tbl_start_addr; /** Identifies the starting address of the IPv6 hashable filter table in IPAv3 onwards. Denotes the offset from the start of the IPA shared memory. */ }; /* Message */ /* Response Message; Requests the modem IPA driver about initialization */ struct ipa_init_modem_driver_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type.*/ /* Optional */ /* Destination end point for control commands from master driver */ uint8_t ctrl_comm_dest_end_pt_valid; /* Must be set to true if ctrl_comm_dest_ep is being passed */ uint32_t ctrl_comm_dest_end_pt; /* Provides information about the destination end point on the * modem processor to which the master driver can send control * commands. The value of this parameter cannot exceed 19 since * IPA only supports 20 end points. This field is looked at only * if the result in TLV RESULT_CODE is QMI_RESULT_SUCCESS */ /* Optional */ /* Default end point */ uint8_t default_end_pt_valid; /* Must be set to true if default_end_pt is being passed */ uint32_t default_end_pt; /* Provides information about the default end point. The master * driver may or may not set the register in the hardware with * this value. The value of this parameter cannot exceed 19 * since IPA only supports 20 end points. This field is looked * at only if the result in TLV RESULT_CODE is QMI_RESULT_SUCCESS */ /* Optional */ /* Modem Driver Initialization Pending */ uint8_t modem_driver_init_pending_valid; /* Must be set to true if modem_driver_init_pending is being passed */ uint8_t modem_driver_init_pending; /* * Identifies if second level message handshake is needed * between drivers to indicate when IPA HWP loading is completed. * If this is set by modem driver, AP driver will need to wait * for a INIT_MODEM_DRIVER_CMPLT message before communicating with * IPA HWP. */ }; /* Message */ /* * Request Message; Request from Modem IPA driver to indicate * modem driver init completion */ struct ipa_init_modem_driver_cmplt_req_msg_v01 { /* Mandatory */ /* Modem Driver init complete status; */ uint8_t status; /* * Specifies whether the modem driver initialization is complete * including the micro controller image loading. */ }; /* Message */ /* * Response Message; Request from Modem IPA driver to indicate * modem driver init completion */ struct ipa_init_modem_driver_cmplt_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /**< Standard response type.*/ }; /* Message */ /* Request Message; This is the message that is exchanged between the * control point and the service in order to register for indications. */ struct ipa_indication_reg_req_msg_v01 { /* Optional */ /* Master driver initialization completion */ uint8_t master_driver_init_complete_valid; /* Must be set to true if master_driver_init_complete is being passed */ uint8_t master_driver_init_complete; /* If set to TRUE, this field indicates that the client is * interested in getting indications about the completion * of the initialization sequence of the master driver. * Setting this field in the request message makes sense * only when the QMI_IPA_INDICATION_REGISTER_REQ is being * originated from the modem driver */ /* Optional */ /* Data Usage Quota Reached */ uint8_t data_usage_quota_reached_valid; /* Must be set to true if data_usage_quota_reached is being passed */ uint8_t data_usage_quota_reached; /* If set to TRUE, this field indicates that the client wants to * receive indications about reaching the data usage quota that * previously set via QMI_IPA_SET_DATA_USAGE_QUOTA. Setting this field * in the request message makes sense only when the * QMI_IPA_INDICATION_REGISTER_REQ is being originated from the Master * driver */ }; /* Message */ /* Response Message; This is the message that is exchanged between the * control point and the service in order to register for indications. */ struct ipa_indication_reg_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /**< Standard response type.*/ }; /* Message */ /* Indication Message; Indication sent to the Modem IPA driver from * master IPA driver about initialization being complete. */ struct ipa_master_driver_init_complt_ind_msg_v01 { /* Mandatory */ /* Master driver initialization completion status */ struct ipa_qmi_response_type_v01 master_driver_init_status; /* Indicates the status of initialization. If everything went * as expected, this field is set to SUCCESS. ERROR is set * otherwise. Extended error info may be used to convey * additional information about the error */ }; /* Message */ struct ipa_ipfltr_range_eq_16_type_v01 { uint8_t offset; /* Specifies the offset from the IHL (Internet Header length) */ uint16_t range_low; /* Specifies the lower bound of the range */ uint16_t range_high; /* Specifies the upper bound of the range */ }; /* Type */ struct ipa_ipfltr_mask_eq_32_type_v01 { uint8_t offset; /* Specifies the offset either from IHL or from the start of * the IP packet. This depends on the equation that this structure * is used in. */ uint32_t mask; /* Specifies the mask that has to be used in the comparison. * The field is ANDed with the mask and compared against the value. */ uint32_t value; /* Specifies the 32 bit value that used in the comparison. */ }; /* Type */ struct ipa_ipfltr_eq_16_type_v01 { uint8_t offset; /* Specifies the offset into the packet */ uint16_t value; /* Specifies the 16 bit value that should be used in the comparison. */ }; /* Type */ struct ipa_ipfltr_eq_32_type_v01 { uint8_t offset; /* Specifies the offset into the packet */ uint32_t value; /* Specifies the 32 bit value that should be used in the comparison. */ }; /* Type */ struct ipa_ipfltr_mask_eq_128_type_v01 { uint8_t offset; /* Specifies the offset into the packet */ uint8_t mask[16]; /* Specifies the mask that has to be used in the comparison. * The field is ANDed with the mask and compared against the value. */ uint8_t value[16]; /* Specifies the 128 bit value that should be used in the comparison. */ }; /* Type */ struct ipa_filter_rule_type_v01 { uint16_t rule_eq_bitmap; /* 16-bit Bitmask to indicate how many eqs are valid in this rule */ uint8_t tos_eq_present; /* Specifies if a type of service check rule is present */ uint8_t tos_eq; /* The value to check against the type of service (ipv4) field */ uint8_t protocol_eq_present; /* Specifies if a protocol check rule is present */ uint8_t protocol_eq; /* The value to check against the protocol field */ uint8_t num_ihl_offset_range_16; /* The number of 16 bit range check rules at the location * determined by IP header length plus a given offset offset * in this rule. See the definition of the ipa_filter_range_eq_16 * for better understanding. The value of this field cannot exceed * IPA_IPFLTR_NUM_IHL_RANGE_16_EQNS which is set as 2 */ struct ipa_ipfltr_range_eq_16_type_v01 ihl_offset_range_16[QMI_IPA_IPFLTR_NUM_IHL_RANGE_16_EQNS_V01]; /* Array of the registered IP header length offset 16 bit range * check rules. */ uint8_t num_offset_meq_32; /* The number of 32 bit masked comparison rules present * in this rule */ struct ipa_ipfltr_mask_eq_32_type_v01 offset_meq_32[QMI_IPA_IPFLTR_NUM_MEQ_32_EQNS_V01]; /* An array of all the possible 32bit masked comparison rules * in this rule */ uint8_t tc_eq_present; /* Specifies if the traffic class rule is present in this rule */ uint8_t tc_eq; /* The value against which the IPV4 traffic class field has to be checked */ uint8_t flow_eq_present; /* Specifies if the "flow equals" rule is present in this rule */ uint32_t flow_eq; /* The value against which the IPV6 flow field has to be checked */ uint8_t ihl_offset_eq_16_present; /* Specifies if there is a 16 bit comparison required at the * location in the packet determined by "Intenet Header length * + specified offset" */ struct ipa_ipfltr_eq_16_type_v01 ihl_offset_eq_16; /* The 16 bit comparison equation */ uint8_t ihl_offset_eq_32_present; /* Specifies if there is a 32 bit comparison required at the * location in the packet determined by "Intenet Header length * + specified offset" */ struct ipa_ipfltr_eq_32_type_v01 ihl_offset_eq_32; /* The 32 bit comparison equation */ uint8_t num_ihl_offset_meq_32; /* The number of 32 bit masked comparison equations in this * rule. The location of the packet to be compared is * determined by the IP Header length + the give offset */ struct ipa_ipfltr_mask_eq_32_type_v01 ihl_offset_meq_32[QMI_IPA_IPFLTR_NUM_IHL_MEQ_32_EQNS_V01]; /* Array of 32 bit masked comparison equations. */ uint8_t num_offset_meq_128; /* The number of 128 bit comparison equations in this rule */ struct ipa_ipfltr_mask_eq_128_type_v01 offset_meq_128[QMI_IPA_IPFLTR_NUM_MEQ_128_EQNS_V01]; /* Array of 128 bit comparison equations. The location in the * packet is determined by the specified offset */ uint8_t metadata_meq32_present; /* Boolean indicating if the 32 bit masked comparison equation * is present or not. Comparison is done against the metadata * in IPA. Metadata can either be extracted from the packet * header or from the "metadata" register. */ struct ipa_ipfltr_mask_eq_32_type_v01 metadata_meq32; /* The metadata 32 bit masked comparison equation */ uint8_t ipv4_frag_eq_present; /* Specifies if the IPv4 Fragment equation is present in this rule */ }; /* Type */ enum ipa_ip_type_enum_v01 { IPA_IP_TYPE_ENUM_MIN_ENUM_VAL_V01 = -2147483647, /* To force a 32 bit signed enum. Do not change or use*/ QMI_IPA_IP_TYPE_INVALID_V01 = 0, /* Invalid IP type identifier */ QMI_IPA_IP_TYPE_V4_V01 = 1, /* IP V4 type */ QMI_IPA_IP_TYPE_V6_V01 = 2, /* IP V6 type */ QMI_IPA_IP_TYPE_V4V6_V01 = 3, /* Applies to both IP types */ IPA_IP_TYPE_ENUM_MAX_ENUM_VAL_V01 = 2147483647 /* To force a 32 bit signed enum. Do not change or use*/ }; enum ipa_filter_action_enum_v01 { IPA_FILTER_ACTION_ENUM_MIN_ENUM_VAL_V01 = -2147483647, /* To force a 32 bit signed enum. Do not change or use */ QMI_IPA_FILTER_ACTION_INVALID_V01 = 0, /* Invalid action on filter hit */ QMI_IPA_FILTER_ACTION_SRC_NAT_V01 = 1, /* Pass packet to NAT block for Source NAT */ QMI_IPA_FILTER_ACTION_DST_NAT_V01 = 2, /* Pass packet to NAT block for Destination NAT */ QMI_IPA_FILTER_ACTION_ROUTING_V01 = 3, /* Pass packet to Routing block */ QMI_IPA_FILTER_ACTION_EXCEPTION_V01 = 4, /* Treat packet as exception and send to exception pipe */ IPA_FILTER_ACTION_ENUM_MAX_ENUM_VAL_V01 = 2147483647 /* To force a 32 bit signed enum. Do not change or use*/ }; struct ipa_filter_spec_type_v01 { uint32_t filter_spec_identifier; /* This field is used to identify a filter spec in the list * of filter specs being sent from the client. This field * is applicable only in the filter install request and response. */ enum ipa_ip_type_enum_v01 ip_type; /* This field identifies the IP type for which this rule is * applicable. The driver needs to identify the filter table * (V6 or V4) and this field is essential for that */ struct ipa_filter_rule_type_v01 filter_rule; /* This field specifies the rules in the filter spec. These rules * are the ones that are matched against fields in the packet. */ enum ipa_filter_action_enum_v01 filter_action; /* This field specifies the action to be taken when a filter match * occurs. The remote side should install this information into the * hardware along with the filter equations. */ uint8_t is_routing_table_index_valid; /* Specifies whether the routing table index is present or not. * If the action is "QMI_IPA_FILTER_ACTION_EXCEPTION", this * parameter need not be provided. */ uint32_t route_table_index; /* This is the index in the routing table that should be used * to route the packets if the filter rule is hit */ uint8_t is_mux_id_valid; /* Specifies whether the mux_id is valid */ uint32_t mux_id; /* This field identifies the QMAP MUX ID. As a part of QMAP * protocol, several data calls may be multiplexed over the * same physical transport channel. This identifier is used to * identify one such data call. The maximum value for this * identifier is 255. */ }; /* Type */ struct ipa_filter_spec_ex_type_v01 { enum ipa_ip_type_enum_v01 ip_type; /* This field identifies the IP type for which this rule is * applicable. The driver needs to identify the filter table * (V6 or V4) and this field is essential for that */ struct ipa_filter_rule_type_v01 filter_rule; /* This field specifies the rules in the filter spec. These rules * are the ones that are matched against fields in the packet. */ enum ipa_filter_action_enum_v01 filter_action; /* This field specifies the action to be taken when a filter match * occurs. The remote side should install this information into the * hardware along with the filter equations. */ uint8_t is_routing_table_index_valid; /* Specifies whether the routing table index is present or not. * If the action is "QMI_IPA_FILTER_ACTION_EXCEPTION", this * parameter need not be provided. */ uint32_t route_table_index; /* This is the index in the routing table that should be used * to route the packets if the filter rule is hit */ uint8_t is_mux_id_valid; /* Specifies whether the mux_id is valid */ uint32_t mux_id; /* This field identifies the QMAP MUX ID. As a part of QMAP * protocol, several data calls may be multiplexed over the * same physical transport channel. This identifier is used to * identify one such data call. The maximum value for this * identifier is 255. */ uint32_t rule_id; /** Rule Id of the given filter. The Rule Id is populated in the rule header when installing the rule in IPA. */ uint8_t is_rule_hashable; /** Specifies whether the given rule is hashable. */ }; /* Type */ /* Request Message; This is the message that is exchanged between the * control point and the service in order to request the installation * of filtering rules in the hardware block by the remote side. */ struct ipa_install_fltr_rule_req_msg_v01 { /* Optional */ /* IP type that this rule applies to Filter specification to be installed in the hardware */ uint8_t filter_spec_list_valid; /* Must be set to true if filter_spec_list is being passed */ uint32_t filter_spec_list_len; /* Must be set to # of elements in filter_spec_list */ struct ipa_filter_spec_type_v01 filter_spec_list[QMI_IPA_MAX_FILTERS_V01]; /* This structure defines the list of filters that have * to be installed in the hardware. The driver installing * these rules shall do so in the same order as specified * in this list. */ /* Optional */ /* Pipe index to intall rule */ uint8_t source_pipe_index_valid; /* Must be set to true if source_pipe_index is being passed */ uint32_t source_pipe_index; /* This is the source pipe on which the filter rule is to be * installed. The requestor may always not know the pipe * indices. If not specified, the receiver shall install * this rule on all the pipes that it controls through * which data may be fed into IPA. */ /* Optional */ /* Total number of IPv4 filters in the filter spec list */ uint8_t num_ipv4_filters_valid; /* Must be set to true if num_ipv4_filters is being passed */ uint32_t num_ipv4_filters; /* Number of IPv4 rules included in filter spec list */ /* Optional */ /* Total number of IPv6 filters in the filter spec list */ uint8_t num_ipv6_filters_valid; /* Must be set to true if num_ipv6_filters is being passed */ uint32_t num_ipv6_filters; /* Number of IPv6 rules included in filter spec list */ /* Optional */ /* List of XLAT filter indices in the filter spec list */ uint8_t xlat_filter_indices_list_valid; /* Must be set to true if xlat_filter_indices_list * is being passed */ uint32_t xlat_filter_indices_list_len; /* Must be set to # of elements in xlat_filter_indices_list */ uint32_t xlat_filter_indices_list[QMI_IPA_MAX_FILTERS_V01]; /* List of XLAT filter indices. Filter rules at specified indices * will need to be modified by the receiver if the PDN is XLAT * before installing them on the associated IPA consumer pipe. */ /* Optional */ /* Extended Filter Specification */ uint8_t filter_spec_ex_list_valid; /* Must be set to true if filter_spec_ex_list is being passed */ uint32_t filter_spec_ex_list_len; /* Must be set to # of elements in filter_spec_ex_list */ struct ipa_filter_spec_ex_type_v01 filter_spec_ex_list[QMI_IPA_MAX_FILTERS_V01]; /* * List of filter specifications of filters that must be installed in * the IPAv3.x hardware. * The driver installing these rules must do so in the same * order as specified in this list. */ }; /* Message */ struct ipa_filter_rule_identifier_to_handle_map_v01 { uint32_t filter_spec_identifier; /* This field is used to identify a filter spec in the list of * filter specs being sent from the client. This field is * applicable only in the filter install request and response. */ uint32_t filter_handle; /* This field is used to identify a rule in any subsequent message. * This is a value that is provided by the server to the control * point */ }; /* Type */ /* Response Message; This is the message that is exchanged between the * control point and the service in order to request the * installation of filtering rules in the hardware block by * the remote side. */ struct ipa_install_fltr_rule_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type. * Standard response type. Contains the following data members: * - qmi_result_type -- QMI_RESULT_SUCCESS or QMI_RESULT_FAILURE * - qmi_error_type -- Error code. Possible error code values are * described in the error codes section of each message definition. */ /* Optional */ /* Filter Handle List */ uint8_t filter_handle_list_valid; /* Must be set to true if filter_handle_list is being passed */ uint32_t filter_handle_list_len; /* Must be set to # of elements in filter_handle_list */ struct ipa_filter_rule_identifier_to_handle_map_v01 filter_handle_list[QMI_IPA_MAX_FILTERS_V01]; /* * List of handles returned to the control point. Each handle is * mapped to the rule identifier that was specified in the * request message. Any further reference to the rule is done * using the filter handle. */ /* Optional */ /* Rule id List */ uint8_t rule_id_valid; /* Must be set to true if rule_id is being passed */ uint32_t rule_id_len; /* Must be set to # of elements in rule_id */ uint32_t rule_id[QMI_IPA_MAX_FILTERS_V01]; /* * List of rule ids returned to the control point. * Any further reference to the rule is done using the * filter rule id specified in this list. */ }; /* Message */ struct ipa_filter_handle_to_index_map_v01 { uint32_t filter_handle; /* This is a handle that was given to the remote client that * requested the rule addition. */ uint32_t filter_index; /* This index denotes the location in a filter table, where the * filter rule has been installed. The maximum value of this * field is 64. */ }; /* Type */ /* Request Message; This is the message that is exchanged between the * control point and the service in order to notify the remote driver * of the installation of the filter rule supplied earlier by the * remote driver. */ struct ipa_fltr_installed_notif_req_msg_v01 { /* Mandatory */ /* Pipe index */ uint32_t source_pipe_index; /* This is the source pipe on which the filter rule has been * installed or was attempted to be installed */ /* Mandatory */ /* Installation Status */ enum ipa_qmi_result_type_v01 install_status; /* This is the status of installation. If this indicates * SUCCESS, other optional fields carry additional * information */ /* Mandatory */ /* List of Filter Indices */ uint32_t filter_index_list_len; /* Must be set to # of elements in filter_index_list */ struct ipa_filter_handle_to_index_map_v01 filter_index_list[QMI_IPA_MAX_FILTERS_V01]; /* * Provides the list of filter indices and the corresponding * filter handle. If the installation_status indicates a * failure, the filter indices must be set to a reserve * index (255). */ /* Optional */ /* Embedded pipe index */ uint8_t embedded_pipe_index_valid; /* Must be set to true if embedded_pipe_index is being passed */ uint32_t embedded_pipe_index; /* This index denotes the embedded pipe number on which a call to * the same PDN has been made. If this field is set, it denotes * that this is a use case where PDN sharing is happening. The * embedded pipe is used to send data from the embedded client * in the device */ /* Optional */ /* Retain Header Configuration */ uint8_t retain_header_valid; /* Must be set to true if retain_header is being passed */ uint8_t retain_header; /* This field indicates if the driver installing the rule has * turned on the "retain header" bit. If this is true, the * header that is removed by IPA is reinserted after the * packet processing is completed. */ /* Optional */ /* Embedded call Mux Id */ uint8_t embedded_call_mux_id_valid; /**< Must be set to true if embedded_call_mux_id is being passed */ uint32_t embedded_call_mux_id; /* This identifies one of the many calls that have been originated * on the embedded pipe. This is how we identify the PDN gateway * to which traffic from the source pipe has to flow. */ /* Optional */ /* Total number of IPv4 filters in the filter index list */ uint8_t num_ipv4_filters_valid; /* Must be set to true if num_ipv4_filters is being passed */ uint32_t num_ipv4_filters; /* Number of IPv4 rules included in filter index list */ /* Optional */ /* Total number of IPv6 filters in the filter index list */ uint8_t num_ipv6_filters_valid; /* Must be set to true if num_ipv6_filters is being passed */ uint32_t num_ipv6_filters; /* Number of IPv6 rules included in filter index list */ /* Optional */ /* Start index on IPv4 filters installed on source pipe */ uint8_t start_ipv4_filter_idx_valid; /* Must be set to true if start_ipv4_filter_idx is being passed */ uint32_t start_ipv4_filter_idx; /* Start index of IPv4 rules in filter index list */ /* Optional */ /* Start index on IPv6 filters installed on source pipe */ uint8_t start_ipv6_filter_idx_valid; /* Must be set to true if start_ipv6_filter_idx is being passed */ uint32_t start_ipv6_filter_idx; /* Start index of IPv6 rules in filter index list */ /* Optional */ /* List of Rule Ids */ uint8_t rule_id_valid; /* Must be set to true if rule_id is being passed */ uint32_t rule_id_len; /* Must be set to # of elements in rule_id */ uint32_t rule_id[QMI_IPA_MAX_FILTERS_V01]; /* * Provides the list of Rule Ids of rules added in IPA on the given * source pipe index. If the install_status TLV indicates a * failure, the Rule Ids in this list must be set to a reserved * index (255). */ }; /* Message */ /* Response Message; This is the message that is exchanged between the * control point and the service in order to notify the remote driver * of the installation of the filter rule supplied earlier by the * remote driver. */ struct ipa_fltr_installed_notif_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type */ }; /* Message */ /* Request Message; Notifies the remote driver of the need to clear the data * path to prevent the IPA from being blocked at the head of the processing * pipeline */ struct ipa_enable_force_clear_datapath_req_msg_v01 { /* Mandatory */ /* Pipe Mask */ uint32_t source_pipe_bitmask; /* Set of consumer (source) pipes that must be clear of * active data transfers. */ /* Mandatory */ /* Request ID */ uint32_t request_id; /* Identifies the ID of the request that is sent to the server * The same request ID is used in the message to remove the force_clear * request. The server is expected to keep track of the request ID and * the source_pipe_bitmask so that it can revert as needed */ /* Optional */ /* Source Throttle State */ uint8_t throttle_source_valid; /* Must be set to true if throttle_source is being passed */ uint8_t throttle_source; /* Specifies whether the server is to throttle the data from * these consumer (source) pipes after clearing the exisiting * data present in the IPA that were pulled from these pipes * The server is expected to put all the source pipes in the * source_pipe_bitmask in the same state */ }; /* Message */ /* Response Message; Notifies the remote driver of the need to clear the * data path to prevent the IPA from being blocked at the head of the * processing pipeline */ struct ipa_enable_force_clear_datapath_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type */ }; /* Message */ /* Request Message; Notifies the remote driver that the forceful clearing * of the data path can be lifted */ struct ipa_disable_force_clear_datapath_req_msg_v01 { /* Mandatory */ /* Request ID */ uint32_t request_id; /* Identifies the request that was sent to the server to * forcibly clear the data path. This request simply undoes * the operation done in that request */ }; /* Message */ /* Response Message; Notifies the remote driver that the forceful clearing * of the data path can be lifted */ struct ipa_disable_force_clear_datapath_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type */ }; /* Message */ enum ipa_peripheral_speed_enum_v01 { IPA_PERIPHERAL_SPEED_ENUM_MIN_ENUM_VAL_V01 = -2147483647, /* To force a 32 bit signed enum. Do not change or use */ QMI_IPA_PER_USB_FS_V01 = 1, /* Full-speed USB connection */ QMI_IPA_PER_USB_HS_V01 = 2, /* High-speed USB connection */ QMI_IPA_PER_USB_SS_V01 = 3, /* Super-speed USB connection */ QMI_IPA_PER_WLAN_V01 = 4, /* WLAN connection */ IPA_PERIPHERAL_SPEED_ENUM_MAX_ENUM_VAL_V01 = 2147483647 /* To force a 32 bit signed enum. Do not change or use*/ }; enum ipa_pipe_mode_enum_v01 { IPA_PIPE_MODE_ENUM_MIN_ENUM_VAL_V01 = -2147483647, /* To force a 32 bit signed enum. Do not change or use */ QMI_IPA_PIPE_MODE_HW_V01 = 1, /* Pipe is connected with a hardware block */ QMI_IPA_PIPE_MODE_SW_V01 = 2, /* Pipe is controlled by the software */ IPA_PIPE_MODE_ENUM_MAX_ENUM_VAL_V01 = 2147483647 /* To force a 32 bit signed enum. Do not change or use */ }; enum ipa_peripheral_type_enum_v01 { IPA_PERIPHERAL_TYPE_ENUM_MIN_ENUM_VAL_V01 = -2147483647, /* To force a 32 bit signed enum. Do not change or use */ QMI_IPA_PERIPHERAL_USB_V01 = 1, /* Specifies a USB peripheral */ QMI_IPA_PERIPHERAL_HSIC_V01 = 2, /* Specifies an HSIC peripheral */ QMI_IPA_PERIPHERAL_PCIE_V01 = 3, /* Specifies a PCIe peripheral */ IPA_PERIPHERAL_TYPE_ENUM_MAX_ENUM_VAL_V01 = 2147483647 /* To force a 32 bit signed enum. Do not change or use */ }; struct ipa_config_req_msg_v01 { /* Optional */ /* Peripheral Type */ uint8_t peripheral_type_valid; /* Must be set to true if peripheral_type is being passed */ enum ipa_peripheral_type_enum_v01 peripheral_type; /* Informs the remote driver about the perhipheral for * which this configuration information is relevant. Values: * - QMI_IPA_PERIPHERAL_USB (1) -- Specifies a USB peripheral * - QMI_IPA_PERIPHERAL_HSIC(2) -- Specifies an HSIC peripheral * - QMI_IPA_PERIPHERAL_PCIE(3) -- Specifies a PCIe peripheral */ /* Optional */ /* HW Deaggregation Support */ uint8_t hw_deaggr_supported_valid; /* Must be set to true if hw_deaggr_supported is being passed */ uint8_t hw_deaggr_supported; /* Informs the remote driver whether the local IPA driver * allows de-aggregation to be performed in the hardware */ /* Optional */ /* Maximum Aggregation Frame Size */ uint8_t max_aggr_frame_size_valid; /* Must be set to true if max_aggr_frame_size is being passed */ uint32_t max_aggr_frame_size; /* Specifies the maximum size of the aggregated frame that * the remote driver can expect from this execution environment * - Valid range: 128 bytes to 32768 bytes */ /* Optional */ /* IPA Ingress Pipe Mode */ uint8_t ipa_ingress_pipe_mode_valid; /* Must be set to true if ipa_ingress_pipe_mode is being passed */ enum ipa_pipe_mode_enum_v01 ipa_ingress_pipe_mode; /* Indicates to the remote driver if the ingress pipe into the * IPA is in direct connection with another hardware block or * if the producer of data to this ingress pipe is a software * module. Values: * -QMI_IPA_PIPE_MODE_HW(1) --Pipe is connected with hardware block * -QMI_IPA_PIPE_MODE_SW(2) --Pipe is controlled by the software */ /* Optional */ /* Peripheral Speed Info */ uint8_t peripheral_speed_info_valid; /* Must be set to true if peripheral_speed_info is being passed */ enum ipa_peripheral_speed_enum_v01 peripheral_speed_info; /* Indicates the speed that the peripheral connected to the IPA supports * Values: * - QMI_IPA_PER_USB_FS (1) -- Full-speed USB connection * - QMI_IPA_PER_USB_HS (2) -- High-speed USB connection * - QMI_IPA_PER_USB_SS (3) -- Super-speed USB connection * - QMI_IPA_PER_WLAN (4) -- WLAN connection */ /* Optional */ /* Downlink Accumulation Time limit */ uint8_t dl_accumulation_time_limit_valid; /* Must be set to true if dl_accumulation_time_limit is being passed */ uint32_t dl_accumulation_time_limit; /* Informs the remote driver about the time for which data * is accumulated in the downlink direction before it is pushed into the * IPA (downlink is with respect to the WWAN air interface) * - Units: milliseconds * - Maximum value: 255 */ /* Optional */ /* Downlink Accumulation Packet limit */ uint8_t dl_accumulation_pkt_limit_valid; /* Must be set to true if dl_accumulation_pkt_limit is being passed */ uint32_t dl_accumulation_pkt_limit; /* Informs the remote driver about the number of packets * that are to be accumulated in the downlink direction before it is * pushed into the IPA - Maximum value: 1023 */ /* Optional */ /* Downlink Accumulation Byte Limit */ uint8_t dl_accumulation_byte_limit_valid; /* Must be set to true if dl_accumulation_byte_limit is being passed */ uint32_t dl_accumulation_byte_limit; /* Inform the remote driver about the number of bytes * that are to be accumulated in the downlink direction before it * is pushed into the IPA - Maximum value: TBD */ /* Optional */ /* Uplink Accumulation Time Limit */ uint8_t ul_accumulation_time_limit_valid; /* Must be set to true if ul_accumulation_time_limit is being passed */ uint32_t ul_accumulation_time_limit; /* Inform thes remote driver about the time for which data * is to be accumulated in the uplink direction before it is pushed into * the IPA (downlink is with respect to the WWAN air interface). * - Units: milliseconds * - Maximum value: 255 */ /* Optional */ /* HW Control Flags */ uint8_t hw_control_flags_valid; /* Must be set to true if hw_control_flags is being passed */ uint32_t hw_control_flags; /* Informs the remote driver about the hardware control flags: * - Bit 0: IPA_HW_FLAG_HALT_SYSTEM_ON_NON_TERMINAL_FAILURE -- * Indicates to the hardware that it must not continue with * any subsequent operation even if the failure is not terminal * - Bit 1: IPA_HW_FLAG_NO_REPORT_MHI_CHANNEL_ERORR -- * Indicates to the hardware that it is not required to report * channel errors to the host. * - Bit 2: IPA_HW_FLAG_NO_REPORT_MHI_CHANNEL_WAKE_UP -- * Indicates to the hardware that it is not required to generate * wake-up events to the host. * - Bit 4: IPA_HW_FLAG_WORK_OVER_DDR -- * Indicates to the hardware that it is accessing addresses in * the DDR and not over PCIe * - Bit 5: IPA_HW_FLAG_INTERRUPT_MODE_CTRL_FLAG -- * Indicates whether the device must * raise an event to let the host know that it is going into an * interrupt mode (no longer polling for data/buffer availability) */ /* Optional */ /* Uplink MSI Event Threshold */ uint8_t ul_msi_event_threshold_valid; /* Must be set to true if ul_msi_event_threshold is being passed */ uint32_t ul_msi_event_threshold; /* Informs the remote driver about the threshold that will * cause an interrupt (MSI) to be fired to the host. This ensures * that the remote driver does not accumulate an excesive number of * events before firing an interrupt. * This threshold is applicable for data moved in the UL direction. * - Maximum value: 65535 */ /* Optional */ /* Downlink MSI Event Threshold */ uint8_t dl_msi_event_threshold_valid; /* Must be set to true if dl_msi_event_threshold is being passed */ uint32_t dl_msi_event_threshold; /* Informs the remote driver about the threshold that will * cause an interrupt (MSI) to be fired to the host. This ensures * that the remote driver does not accumulate an excesive number of * events before firing an interrupt * This threshold is applicable for data that is moved in the * DL direction - Maximum value: 65535 */ /* Optional */ /* Uplink Fifo Size */ uint8_t ul_fifo_size_valid; /* Must be set to true if ul_fifo_size is being passed */ uint32_t ul_fifo_size; /* * Informs the remote driver about the total Uplink xDCI * buffer size that holds the complete aggregated frame * or BAM data fifo size of the peripheral channel/pipe(in Bytes). * This deprecates the max_aggr_frame_size field. This TLV * deprecates max_aggr_frame_size TLV from version 1.9 onwards * and the max_aggr_frame_size TLV will be ignored in the presence * of this TLV. */ /* Optional */ /* Downlink Fifo Size */ uint8_t dl_fifo_size_valid; /* Must be set to true if dl_fifo_size is being passed */ uint32_t dl_fifo_size; /* * Informs the remote driver about the total Downlink xDCI buffering * capacity or BAM data fifo size of the peripheral channel/pipe. * (In Bytes). dl_fifo_size = n * dl_buf_size. This deprecates the * max_aggr_frame_size field. If this value is set * max_aggr_frame_size is ignored. */ /* Optional */ /* Downlink Buffer Size */ uint8_t dl_buf_size_valid; /* Must be set to true if dl_buf_size is being passed */ uint32_t dl_buf_size; /* Informs the remote driver about the single xDCI buffer size. This is applicable only in GSI mode(in Bytes).\n */ }; /* Message */ /* Response Message; Notifies the remote driver of the configuration * information */ struct ipa_config_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /**< Standard response type.*/ }; /* Message */ enum ipa_stats_type_enum_v01 { IPA_STATS_TYPE_ENUM_MIN_ENUM_VAL_V01 = -2147483647, /* To force a 32 bit signed enum. Do not change or use */ QMI_IPA_STATS_TYPE_INVALID_V01 = 0, /* Invalid stats type identifier */ QMI_IPA_STATS_TYPE_PIPE_V01 = 1, /* Pipe stats type */ QMI_IPA_STATS_TYPE_FILTER_RULES_V01 = 2, /* Filter rule stats type */ IPA_STATS_TYPE_ENUM_MAX_ENUM_VAL_V01 = 2147483647 /* To force a 32 bit signed enum. Do not change or use */ }; struct ipa_pipe_stats_info_type_v01 { uint32_t pipe_index; /* Pipe index for statistics to be retrieved. */ uint64_t num_ipv4_packets; /* Accumulated number of IPv4 packets over this pipe. */ uint64_t num_ipv4_bytes; /* Accumulated number of IPv4 bytes over this pipe. */ uint64_t num_ipv6_packets; /* Accumulated number of IPv6 packets over this pipe. */ uint64_t num_ipv6_bytes; /* Accumulated number of IPv6 bytes over this pipe. */ }; struct ipa_stats_type_filter_rule_v01 { uint32_t filter_rule_index; /* Filter rule index for statistics to be retrieved. */ uint64_t num_packets; /* Accumulated number of packets over this filter rule. */ }; /* Request Message; Retrieve the data statistics collected on modem * IPA driver. */ struct ipa_get_data_stats_req_msg_v01 { /* Mandatory */ /* Stats Type */ enum ipa_stats_type_enum_v01 ipa_stats_type; /* Indicates the type of statistics to be retrieved. */ /* Optional */ /* Reset Statistics */ uint8_t reset_stats_valid; /* Must be set to true if reset_stats is being passed */ uint8_t reset_stats; /* Option to reset the specific type of data statistics * currently collected. */ }; /* Message */ /* Response Message; Retrieve the data statistics collected * on modem IPA driver. */ struct ipa_get_data_stats_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type. */ /* Optional */ /* Stats Type */ uint8_t ipa_stats_type_valid; /* Must be set to true if ipa_stats_type is passed */ enum ipa_stats_type_enum_v01 ipa_stats_type; /* Indicates the type of statistics that are retrieved. */ /* Optional */ /* Uplink Source Pipe Statistics List */ uint8_t ul_src_pipe_stats_list_valid; /* Must be set to true if ul_src_pipe_stats_list is being passed */ uint32_t ul_src_pipe_stats_list_len; /* Must be set to # of elements in ul_src_pipe_stats_list */ struct ipa_pipe_stats_info_type_v01 ul_src_pipe_stats_list[QMI_IPA_MAX_PIPES_V01]; /* List of all Uplink pipe statistics that are retrieved. */ /* Optional */ /* Downlink Destination Pipe Statistics List */ uint8_t dl_dst_pipe_stats_list_valid; /* Must be set to true if dl_dst_pipe_stats_list is being passed */ uint32_t dl_dst_pipe_stats_list_len; /* Must be set to # of elements in dl_dst_pipe_stats_list */ struct ipa_pipe_stats_info_type_v01 dl_dst_pipe_stats_list[QMI_IPA_MAX_PIPES_V01]; /* List of all Downlink pipe statistics that are retrieved. */ /* Optional */ /* Downlink Filter Rule Stats List */ uint8_t dl_filter_rule_stats_list_valid; /* Must be set to true if dl_filter_rule_stats_list is being passed */ uint32_t dl_filter_rule_stats_list_len; /* Must be set to # of elements in dl_filter_rule_stats_list */ struct ipa_stats_type_filter_rule_v01 dl_filter_rule_stats_list[QMI_IPA_MAX_FILTERS_V01]; /* List of all Downlink filter rule statistics retrieved. */ }; /* Message */ struct ipa_apn_data_stats_info_type_v01 { uint32_t mux_id; /* Indicates the MUX ID associated with the APN for which the data * usage statistics is queried */ uint64_t num_ul_packets; /* Accumulated number of uplink packets corresponding to * this Mux ID */ uint64_t num_ul_bytes; /* Accumulated number of uplink bytes corresponding to * this Mux ID */ uint64_t num_dl_packets; /* Accumulated number of downlink packets corresponding * to this Mux ID */ uint64_t num_dl_bytes; /* Accumulated number of downlink bytes corresponding to * this Mux ID */ }; /* Type */ /* Request Message; Retrieve the APN data statistics collected from modem */ struct ipa_get_apn_data_stats_req_msg_v01 { /* Optional */ /* Mux ID List */ uint8_t mux_id_list_valid; /* Must be set to true if mux_id_list is being passed */ uint32_t mux_id_list_len; /* Must be set to # of elements in mux_id_list */ uint32_t mux_id_list[QMI_IPA_MAX_APN_V01]; /* The list of MUX IDs associated with APNs for which the data usage * statistics is being retrieved */ }; /* Message */ /* Response Message; Retrieve the APN data statistics collected from modem */ struct ipa_get_apn_data_stats_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type.*/ /* Optional */ /* APN Data Statistics List */ uint8_t apn_data_stats_list_valid; /* Must be set to true if apn_data_stats_list is being passed */ uint32_t apn_data_stats_list_len; /* Must be set to # of elements in apn_data_stats_list */ struct ipa_apn_data_stats_info_type_v01 apn_data_stats_list[QMI_IPA_MAX_APN_V01]; /* List of APN data retrieved as per request on mux_id. * For now, only one APN monitoring is supported on modem driver. * Making this as list for expandability to support more APNs in future. */ }; /* Message */ struct ipa_data_usage_quota_info_type_v01 { uint32_t mux_id; /* Indicates the MUX ID associated with the APN for which the data usage * quota needs to be set */ uint64_t num_Mbytes; /* Number of Mega-bytes of quota value to be set on this APN associated * with this Mux ID. */ }; /* Type */ /* Request Message; Master driver sets a data usage quota value on * modem driver */ struct ipa_set_data_usage_quota_req_msg_v01 { /* Optional */ /* APN Quota List */ uint8_t apn_quota_list_valid; /* Must be set to true if apn_quota_list is being passed */ uint32_t apn_quota_list_len; /* Must be set to # of elements in apn_quota_list */ struct ipa_data_usage_quota_info_type_v01 apn_quota_list[QMI_IPA_MAX_APN_V01]; /* The list of APNs on which a data usage quota to be set on modem * driver. For now, only one APN monitoring is supported on modem * driver. Making this as list for expandability to support more * APNs in future. */ }; /* Message */ /* Response Message; Master driver sets a data usage on modem driver. */ struct ipa_set_data_usage_quota_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type.*/ }; /* Message */ /* Indication Message; Modem driver sends this indication to master * driver when the data usage quota is reached */ struct ipa_data_usage_quota_reached_ind_msg_v01 { /* Mandatory */ /* APN Quota List */ struct ipa_data_usage_quota_info_type_v01 apn; /* This message indicates which APN has the previously set quota * reached. For now, only one APN monitoring is supported on modem * driver. */ }; /* Message */ /* Request Message; Master driver request modem driver to terminate * the current data usage quota monitoring session. */ struct ipa_stop_data_usage_quota_req_msg_v01 { /* This element is a placeholder to prevent the declaration of * an empty struct. DO NOT USE THIS FIELD UNDER ANY CIRCUMSTANCE */ char __placeholder; }; /* Message */ /* Response Message; Master driver request modem driver to terminate * the current quota monitoring session. */ struct ipa_stop_data_usage_quota_resp_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /**< Standard response type.*/ }; /* Message */ /* Request Message; Request from Modem IPA driver to set DPL peripheral pipe */ struct ipa_install_fltr_rule_req_ex_msg_v01 { /* Optional */ /* Extended Filter Specification */ uint8_t filter_spec_ex_list_valid; uint32_t filter_spec_ex_list_len; struct ipa_filter_spec_ex_type_v01 filter_spec_ex_list[QMI_IPA_MAX_FILTERS_EX_V01]; /* List of filter specifications of filters that must be installed in the IPAv3.x hardware. The driver installing these rules must do so in the same order as specified in this list. */ /* Optional */ /* Pipe Index to Install Rule */ uint8_t source_pipe_index_valid; uint32_t source_pipe_index; /* Pipe index to install the filter rule. The requester may not always know the pipe indices. If not specified, the receiver must install this rule on all pipes that it controls, through which data may be fed into the IPA. */ /* Optional */ /* Total Number of IPv4 Filters in the Filter Spec List */ uint8_t num_ipv4_filters_valid; uint32_t num_ipv4_filters; /* Number of IPv4 rules included in the filter specification list. */ /* Optional */ /* Total Number of IPv6 Filters in the Filter Spec List */ uint8_t num_ipv6_filters_valid; uint32_t num_ipv6_filters; /* Number of IPv6 rules included in the filter specification list. */ /* Optional */ /* List of XLAT Filter Indices in the Filter Spec List */ uint8_t xlat_filter_indices_list_valid; uint32_t xlat_filter_indices_list_len; uint32_t xlat_filter_indices_list[QMI_IPA_MAX_FILTERS_EX_V01]; /* List of XLAT filter indices. Filter rules at specified indices must be modified by the receiver if the PDN is XLAT before installing them on the associated IPA consumer pipe. */ }; /* Message */ /* Response Message; Requests installation of filtering rules in the hardware * block on the remote side. */ struct ipa_install_fltr_rule_resp_ex_msg_v01 { /* Mandatory */ /* Result Code */ struct ipa_qmi_response_type_v01 resp; /* Standard response type. Standard response type. Contains the following data members: - qmi_result_type -- QMI_RESULT_SUCCESS or QMI_RESULT_FAILURE - qmi_error_type -- Error code. Possible error code values are described in the error codes section of each message definition. */ /* Optional */ /* Rule ID List */ uint8_t rule_id_valid; uint32_t rule_id_len; uint32_t rule_id[QMI_IPA_MAX_FILTERS_EX_V01]; /* List of rule IDs returned to the control point. Any further reference to the rule is done using the filter rule ID specified in this list. */ }; /* Message */ /*Service Message Definition*/ #define QMI_IPA_INDICATION_REGISTER_REQ_V01 0x0020 #define QMI_IPA_INDICATION_REGISTER_RESP_V01 0x0020 #define QMI_IPA_INIT_MODEM_DRIVER_REQ_V01 0x0021 #define QMI_IPA_INIT_MODEM_DRIVER_RESP_V01 0x0021 #define QMI_IPA_MASTER_DRIVER_INIT_COMPLETE_IND_V01 0x0022 #define QMI_IPA_INSTALL_FILTER_RULE_REQ_V01 0x0023 #define QMI_IPA_INSTALL_FILTER_RULE_RESP_V01 0x0023 #define QMI_IPA_FILTER_INSTALLED_NOTIF_REQ_V01 0x0024 #define QMI_IPA_FILTER_INSTALLED_NOTIF_RESP_V01 0x0024 #define QMI_IPA_ENABLE_FORCE_CLEAR_DATAPATH_REQ_V01 0x0025 #define QMI_IPA_ENABLE_FORCE_CLEAR_DATAPATH_RESP_V01 0x0025 #define QMI_IPA_DISABLE_FORCE_CLEAR_DATAPATH_REQ_V01 0x0026 #define QMI_IPA_DISABLE_FORCE_CLEAR_DATAPATH_RESP_V01 0x0026 #define QMI_IPA_CONFIG_REQ_V01 0x0027 #define QMI_IPA_CONFIG_RESP_V01 0x0027 #define QMI_IPA_DISABLE_LINK_LOW_PWR_STATE_REQ_V01 0x0028 #define QMI_IPA_DISABLE_LINK_LOW_PWR_STATE_RESP_V01 0x0028 #define QMI_IPA_ENABLE_LINK_LOW_PWR_STATE_REQ_V01 0x0029 #define QMI_IPA_ENABLE_LINK_LOW_PWR_STATE_RESP_V01 0x0029 #define QMI_IPA_GET_DATA_STATS_REQ_V01 0x0030 #define QMI_IPA_GET_DATA_STATS_RESP_V01 0x0030 #define QMI_IPA_GET_APN_DATA_STATS_REQ_V01 0x0031 #define QMI_IPA_GET_APN_DATA_STATS_RESP_V01 0x0031 #define QMI_IPA_SET_DATA_USAGE_QUOTA_REQ_V01 0x0032 #define QMI_IPA_SET_DATA_USAGE_QUOTA_RESP_V01 0x0032 #define QMI_IPA_DATA_USAGE_QUOTA_REACHED_IND_V01 0x0033 #define QMI_IPA_STOP_DATA_USAGE_QUOTA_REQ_V01 0x0034 #define QMI_IPA_STOP_DATA_USAGE_QUOTA_RESP_V01 0x0034 #define QMI_IPA_INIT_MODEM_DRIVER_CMPLT_REQ_V01 0x0035 #define QMI_IPA_INIT_MODEM_DRIVER_CMPLT_RESP_V01 0x0035 #define QMI_IPA_INSTALL_FILTER_RULE_EX_REQ_V01 0x0037 #define QMI_IPA_INSTALL_FILTER_RULE_EX_RESP_V01 0x0037 /* add for max length*/ #define QMI_IPA_INIT_MODEM_DRIVER_REQ_MAX_MSG_LEN_V01 134 #define QMI_IPA_INIT_MODEM_DRIVER_RESP_MAX_MSG_LEN_V01 25 #define QMI_IPA_INDICATION_REGISTER_REQ_MAX_MSG_LEN_V01 8 #define QMI_IPA_INDICATION_REGISTER_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_INSTALL_FILTER_RULE_REQ_MAX_MSG_LEN_V01 22369 #define QMI_IPA_INSTALL_FILTER_RULE_RESP_MAX_MSG_LEN_V01 783 #define QMI_IPA_FILTER_INSTALLED_NOTIF_REQ_MAX_MSG_LEN_V01 834 #define QMI_IPA_FILTER_INSTALLED_NOTIF_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_MASTER_DRIVER_INIT_COMPLETE_IND_MAX_MSG_LEN_V01 7 #define QMI_IPA_DATA_USAGE_QUOTA_REACHED_IND_MAX_MSG_LEN_V01 15 #define QMI_IPA_ENABLE_FORCE_CLEAR_DATAPATH_REQ_MAX_MSG_LEN_V01 18 #define QMI_IPA_DISABLE_FORCE_CLEAR_DATAPATH_REQ_MAX_MSG_LEN_V01 7 #define QMI_IPA_ENABLE_FORCE_CLEAR_DATAPATH_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_DISABLE_FORCE_CLEAR_DATAPATH_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_CONFIG_REQ_MAX_MSG_LEN_V01 102 #define QMI_IPA_CONFIG_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_DISABLE_LINK_LOW_PWR_STATE_REQ_MAX_MSG_LEN_V01 18 #define QMI_IPA_DISABLE_LINK_LOW_PWR_STATE_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_ENABLE_LINK_LOW_PWR_STATE_REQ_MAX_MSG_LEN_V01 7 #define QMI_IPA_ENABLE_LINK_LOW_PWR_STATE_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_GET_DATA_STATS_REQ_MAX_MSG_LEN_V01 11 #define QMI_IPA_GET_DATA_STATS_RESP_MAX_MSG_LEN_V01 2234 #define QMI_IPA_GET_APN_DATA_STATS_REQ_MAX_MSG_LEN_V01 36 #define QMI_IPA_GET_APN_DATA_STATS_RESP_MAX_MSG_LEN_V01 299 #define QMI_IPA_SET_DATA_USAGE_QUOTA_REQ_MAX_MSG_LEN_V01 100 #define QMI_IPA_SET_DATA_USAGE_QUOTA_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_STOP_DATA_USAGE_QUOTA_REQ_MAX_MSG_LEN_V01 0 #define QMI_IPA_STOP_DATA_USAGE_QUOTA_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_INIT_MODEM_DRIVER_CMPLT_REQ_MAX_MSG_LEN_V01 4 #define QMI_IPA_INIT_MODEM_DRIVER_CMPLT_RESP_MAX_MSG_LEN_V01 7 #define QMI_IPA_INSTALL_FILTER_RULE_EX_REQ_MAX_MSG_LEN_V01 22685 #define QMI_IPA_INSTALL_FILTER_RULE_EX_RESP_MAX_MSG_LEN_V01 523 /* Service Object Accessor */ #endif/* IPA_QMI_SERVICE_V01_H */