Disk/DiskIoDxe/DiskIo.c

/** @file
  DiskIo driver that lays on every BlockIo protocol in the system.
  DiskIo converts a block oriented device to a byte oriented device.

  Disk access may have to handle unaligned request about sector boundaries.
  There are three cases:
    UnderRun - The first byte is not on a sector boundary or the read request is
               less than a sector in length.
    Aligned  - A read of N contiguous sectors.
    OverRun  - The last byte is not on a sector boundary.

Copyright (c) 2006 - 2016, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution.  The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php

THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/

#include "DiskIo.h"

//
// Driver binding protocol implementation for DiskIo driver.
//
EFI_DRIVER_BINDING_PROTOCOL gDiskIoDriverBinding = {
  DiskIoDriverBindingSupported,
  DiskIoDriverBindingStart,
  DiskIoDriverBindingStop,
  0xa,
  NULL,
  NULL
};

//
// Template for DiskIo private data structure.
// The pointer to BlockIo protocol interface is assigned dynamically.
//
DISK_IO_PRIVATE_DATA        gDiskIoPrivateDataTemplate = {
  DISK_IO_PRIVATE_DATA_SIGNATURE,
  {
    EFI_DISK_IO_PROTOCOL_REVISION,
    DiskIoReadDisk,
    DiskIoWriteDisk
  },
  {
    EFI_DISK_IO2_PROTOCOL_REVISION,
    DiskIo2Cancel,
    DiskIo2ReadDiskEx,
    DiskIo2WriteDiskEx,
    DiskIo2FlushDiskEx
  }
};

/**
  Test to see if this driver supports ControllerHandle.

  @param  This                Protocol instance pointer.
  @param  ControllerHandle    Handle of device to test
  @param  RemainingDevicePath Optional parameter use to pick a specific child
                              device to start.

  @retval EFI_SUCCESS         This driver supports this device
  @retval EFI_ALREADY_STARTED This driver is already running on this device
  @retval other               This driver does not support this device

**/
EFI_STATUS
EFIAPI
DiskIoDriverBindingSupported (
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN EFI_HANDLE                   ControllerHandle,
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath OPTIONAL
  )
{
  EFI_STATUS            Status;
  EFI_BLOCK_IO_PROTOCOL *BlockIo;

  //
  // Open the IO Abstraction(s) needed to perform the supported test.
  //
  Status = gBS->OpenProtocol (
                  ControllerHandle,
                  &gEfiBlockIoProtocolGuid,
                  (VOID **) &BlockIo,
                  This->DriverBindingHandle,
                  ControllerHandle,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  //
  // Close the I/O Abstraction(s) used to perform the supported test.
  //
  gBS->CloseProtocol (
         ControllerHandle,
         &gEfiBlockIoProtocolGuid,
         This->DriverBindingHandle,
         ControllerHandle
         );
  return EFI_SUCCESS;
}


/**
  Start this driver on ControllerHandle by opening a Block IO protocol and
  installing a Disk IO protocol on ControllerHandle.

  @param  This                 Protocol instance pointer.
  @param  ControllerHandle     Handle of device to bind driver to
  @param  RemainingDevicePath  Optional parameter use to pick a specific child
                               device to start.

  @retval EFI_SUCCESS          This driver is added to ControllerHandle
  @retval EFI_ALREADY_STARTED  This driver is already running on ControllerHandle
  @retval other                This driver does not support this device

**/
EFI_STATUS
EFIAPI
DiskIoDriverBindingStart (
  IN EFI_DRIVER_BINDING_PROTOCOL  *This,
  IN EFI_HANDLE                   ControllerHandle,
  IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath OPTIONAL
  )
{
  EFI_STATUS            Status;
  DISK_IO_PRIVATE_DATA  *Instance;
  EFI_TPL               OldTpl;

  Instance = NULL;

  OldTpl = gBS->RaiseTPL (TPL_CALLBACK);

  //
  // Connect to the Block IO and Block IO2 interface on ControllerHandle.
  //
  Status = gBS->OpenProtocol (
                  ControllerHandle,
                  &gEfiBlockIoProtocolGuid,
                  (VOID **) &gDiskIoPrivateDataTemplate.BlockIo,
                  This->DriverBindingHandle,
                  ControllerHandle,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );
  if (EFI_ERROR (Status)) {
    goto ErrorExit1;
  }

  Status = gBS->OpenProtocol (
                  ControllerHandle,
                  &gEfiBlockIo2ProtocolGuid,
                  (VOID **) &gDiskIoPrivateDataTemplate.BlockIo2,
                  This->DriverBindingHandle,
                  ControllerHandle,
                  EFI_OPEN_PROTOCOL_BY_DRIVER
                  );
  if (EFI_ERROR (Status)) {
    gDiskIoPrivateDataTemplate.BlockIo2 = NULL;
  }

  //
  // Initialize the Disk IO device instance.
  //
  Instance = AllocateCopyPool (sizeof (DISK_IO_PRIVATE_DATA), &gDiskIoPrivateDataTemplate);
  if (Instance == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto ErrorExit;
  }

  //
  // The BlockSize and IoAlign of BlockIo and BlockIo2 should equal.
  //
  ASSERT ((Instance->BlockIo2 == NULL) ||
          ((Instance->BlockIo->Media->IoAlign == Instance->BlockIo2->Media->IoAlign) &&
           (Instance->BlockIo->Media->BlockSize == Instance->BlockIo2->Media->BlockSize)
          ));

  InitializeListHead (&Instance->TaskQueue);
  EfiInitializeLock (&Instance->TaskQueueLock, TPL_NOTIFY);
  Instance->SharedWorkingBuffer = AllocateAlignedPages (
                                    EFI_SIZE_TO_PAGES (PcdGet32 (PcdDiskIoDataBufferBlockNum) * Instance->BlockIo->Media->BlockSize),
                                    Instance->BlockIo->Media->IoAlign
                                    );
  if (Instance->SharedWorkingBuffer == NULL) {
    Status = EFI_OUT_OF_RESOURCES;
    goto ErrorExit;
  }

  //
  // Install protocol interfaces for the Disk IO device.
  //
  if (Instance->BlockIo2 != NULL) {
    Status = gBS->InstallMultipleProtocolInterfaces (
                    &ControllerHandle,
                    &gEfiDiskIoProtocolGuid,  &Instance->DiskIo,
                    &gEfiDiskIo2ProtocolGuid, &Instance->DiskIo2,
                    NULL
                    );
  } else {
    Status = gBS->InstallMultipleProtocolInterfaces (
                    &ControllerHandle,
                    &gEfiDiskIoProtocolGuid,  &Instance->DiskIo,
                    NULL
                    );
  }

ErrorExit:
  if (EFI_ERROR (Status)) {
    if (Instance != NULL && Instance->SharedWorkingBuffer != NULL) {
      FreeAlignedPages (
        Instance->SharedWorkingBuffer,
        EFI_SIZE_TO_PAGES (PcdGet32 (PcdDiskIoDataBufferBlockNum) * Instance->BlockIo->Media->BlockSize)
        );
    }

    if (Instance != NULL) {
      FreePool (Instance);
    }

    gBS->CloseProtocol (
           ControllerHandle,
           &gEfiBlockIoProtocolGuid,
           This->DriverBindingHandle,
           ControllerHandle
           );
  }

ErrorExit1:
  gBS->RestoreTPL (OldTpl);
  return Status;
}

/**
  Stop this driver on ControllerHandle by removing Disk IO protocol and closing
  the Block IO protocol on ControllerHandle.

  @param  This              Protocol instance pointer.
  @param  ControllerHandle  Handle of device to stop driver on
  @param  NumberOfChildren  Number of Handles in ChildHandleBuffer. If number of
                            children is zero stop the entire bus driver.
  @param  ChildHandleBuffer List of Child Handles to Stop.

  @retval EFI_SUCCESS       This driver is removed ControllerHandle
  @retval other             This driver was not removed from this device

**/
EFI_STATUS
EFIAPI
DiskIoDriverBindingStop (
  IN  EFI_DRIVER_BINDING_PROTOCOL    *This,
  IN  EFI_HANDLE                     ControllerHandle,
  IN  UINTN                          NumberOfChildren,
  IN  EFI_HANDLE                     *ChildHandleBuffer
  )
{
  EFI_STATUS            Status;
  EFI_DISK_IO_PROTOCOL  *DiskIo;
  EFI_DISK_IO2_PROTOCOL *DiskIo2;
  DISK_IO_PRIVATE_DATA  *Instance;
  BOOLEAN               AllTaskDone;

  //
  // Get our context back.
  //
  Status = gBS->OpenProtocol (
                  ControllerHandle,
                  &gEfiDiskIoProtocolGuid,
                  (VOID **) &DiskIo,
                  This->DriverBindingHandle,
                  ControllerHandle,
                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }
  Status = gBS->OpenProtocol (
                  ControllerHandle,
                  &gEfiDiskIo2ProtocolGuid,
                  (VOID **) &DiskIo2,
                  This->DriverBindingHandle,
                  ControllerHandle,
                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
                  );
  if (EFI_ERROR (Status)) {
    DiskIo2 = NULL;
  }

  Instance = DISK_IO_PRIVATE_DATA_FROM_DISK_IO (DiskIo);

  if (DiskIo2 != NULL) {
    //
    // Call BlockIo2::Reset() to terminate any in-flight non-blocking I/O requests
    //
    ASSERT (Instance->BlockIo2 != NULL);
    Status = Instance->BlockIo2->Reset (Instance->BlockIo2, FALSE);
    if (EFI_ERROR (Status)) {
      return Status;
    }
    Status = gBS->UninstallMultipleProtocolInterfaces (
                    ControllerHandle,
                    &gEfiDiskIoProtocolGuid,  &Instance->DiskIo,
                    &gEfiDiskIo2ProtocolGuid, &Instance->DiskIo2,
                    NULL
                    );
  } else {
    Status = gBS->UninstallMultipleProtocolInterfaces (
                    ControllerHandle,
                    &gEfiDiskIoProtocolGuid,  &Instance->DiskIo,
                    NULL
                    );
  }
  if (!EFI_ERROR (Status)) {

    do {
      EfiAcquireLock (&Instance->TaskQueueLock);
      AllTaskDone = IsListEmpty (&Instance->TaskQueue);
      EfiReleaseLock (&Instance->TaskQueueLock);
    } while (!AllTaskDone);

    FreeAlignedPages (
      Instance->SharedWorkingBuffer,
      EFI_SIZE_TO_PAGES (PcdGet32 (PcdDiskIoDataBufferBlockNum) * Instance->BlockIo->Media->BlockSize)
      );

    Status = gBS->CloseProtocol (
                    ControllerHandle,
                    &gEfiBlockIoProtocolGuid,
                    This->DriverBindingHandle,
                    ControllerHandle
                    );
    ASSERT_EFI_ERROR (Status);
    if (DiskIo2 != NULL) {
      Status = gBS->CloseProtocol (
                      ControllerHandle,
                      &gEfiBlockIo2ProtocolGuid,
                      This->DriverBindingHandle,
                      ControllerHandle
                      );
      ASSERT_EFI_ERROR (Status);
    }

    FreePool (Instance);
  }

  return Status;
}


/**
  Destroy the sub task.

  @param Instance     Pointer to the DISK_IO_PRIVATE_DATA.
  @param Subtask      Subtask.

  @return LIST_ENTRY *  Pointer to the next link of subtask.
**/
LIST_ENTRY *
DiskIoDestroySubtask (
  IN DISK_IO_PRIVATE_DATA     *Instance,
  IN DISK_IO_SUBTASK          *Subtask
  )
{
  LIST_ENTRY               *Link;

  if (Subtask->Task != NULL) {
    EfiAcquireLock (&Subtask->Task->SubtasksLock);
  }
  Link = RemoveEntryList (&Subtask->Link);
  if (Subtask->Task != NULL) {
    EfiReleaseLock (&Subtask->Task->SubtasksLock);
  }

  if (!Subtask->Blocking) {
    if (Subtask->WorkingBuffer != NULL) {
      FreeAlignedPages (
        Subtask->WorkingBuffer,
        Subtask->Length < Instance->BlockIo->Media->BlockSize
        ? EFI_SIZE_TO_PAGES (Instance->BlockIo->Media->BlockSize)
        : EFI_SIZE_TO_PAGES (Subtask->Length)
        );
    }
    if (Subtask->BlockIo2Token.Event != NULL) {
      gBS->CloseEvent (Subtask->BlockIo2Token.Event);
    }
  }
  FreePool (Subtask);

  return Link;
}

/**
  The callback for the BlockIo2 ReadBlocksEx/WriteBlocksEx.
  @param  Event                 Event whose notification function is being invoked.
  @param  Context               The pointer to the notification function's context,
                                which points to the DISK_IO_SUBTASK instance.
**/
VOID
EFIAPI
DiskIo2OnReadWriteComplete (
  IN EFI_EVENT            Event,
  IN VOID                 *Context
  )
{
  DISK_IO_SUBTASK       *Subtask;
  DISK_IO2_TASK         *Task;
  EFI_STATUS            TransactionStatus;
  DISK_IO_PRIVATE_DATA  *Instance;

  Subtask           = (DISK_IO_SUBTASK *) Context;
  TransactionStatus = Subtask->BlockIo2Token.TransactionStatus;
  Task              = Subtask->Task;
  Instance          = Task->Instance;

  ASSERT (Subtask->Signature  == DISK_IO_SUBTASK_SIGNATURE);
  ASSERT (Instance->Signature == DISK_IO_PRIVATE_DATA_SIGNATURE);
  ASSERT (Task->Signature     == DISK_IO2_TASK_SIGNATURE);

  if ((Subtask->WorkingBuffer != NULL) && !EFI_ERROR (TransactionStatus) &&
      (Task->Token != NULL) && !Subtask->Write
     ) {
    CopyMem (Subtask->Buffer, Subtask->WorkingBuffer + Subtask->Offset, Subtask->Length);
  }

  DiskIoDestroySubtask (Instance, Subtask);

  if (EFI_ERROR (TransactionStatus) || IsListEmpty (&Task->Subtasks)) {
    if (Task->Token != NULL) {
      //
      // Signal error status once the subtask is failed.
      // Or signal the last status once the last subtask is finished.
      //
      Task->Token->TransactionStatus = TransactionStatus;
      gBS->SignalEvent (Task->Token->Event);

      //
      // Mark token to NULL indicating the Task is a dead task.
      //
      Task->Token = NULL;
    }
  }
}

/**
  Create the subtask.

  @param Write         TRUE: Write request; FALSE: Read request.
  @param Lba           The starting logical block address to read from on the device.
  @param Offset        The starting byte offset to read from the LBA.
  @param Length        The number of bytes to read from the device.
  @param WorkingBuffer The aligned buffer to hold the data for reading or writing.
  @param Buffer        The buffer to hold the data for reading or writing.
  @param Blocking      TRUE: Blocking request; FALSE: Non-blocking request.

  @return A pointer to the created subtask.
**/
DISK_IO_SUBTASK *
DiskIoCreateSubtask (
  IN BOOLEAN          Write,
  IN UINT64           Lba,
  IN UINT32           Offset,
  IN UINTN            Length,
  IN VOID             *WorkingBuffer,  OPTIONAL
  IN VOID             *Buffer,
  IN BOOLEAN          Blocking
  )
{
  DISK_IO_SUBTASK       *Subtask;
  EFI_STATUS            Status;

  Subtask = AllocateZeroPool (sizeof (DISK_IO_SUBTASK));
  if (Subtask == NULL) {
    return NULL;
  }
  Subtask->Signature     = DISK_IO_SUBTASK_SIGNATURE;
  Subtask->Write         = Write;
  Subtask->Lba           = Lba;
  Subtask->Offset        = Offset;
  Subtask->Length        = Length;
  Subtask->WorkingBuffer = WorkingBuffer;
  Subtask->Buffer        = Buffer;
  Subtask->Blocking      = Blocking;
  if (!Blocking) {
    Status = gBS->CreateEvent (
                    EVT_NOTIFY_SIGNAL,
                    TPL_NOTIFY,
                    DiskIo2OnReadWriteComplete,
                    Subtask,
                    &Subtask->BlockIo2Token.Event
                    );
    if (EFI_ERROR (Status)) {
      FreePool (Subtask);
      return NULL;
    }
  }
  DEBUG ((
    EFI_D_BLKIO,
    "  %c:Lba/Offset/Length/WorkingBuffer/Buffer = %016lx/%08x/%08x/%08x/%08x\n",
    Write ? 'W': 'R', Lba, Offset, Length, WorkingBuffer, Buffer
    ));

  return Subtask;
}

/**
  Create the subtask list.

  @param Instance            Pointer to the DISK_IO_PRIVATE_DATA.
  @param Write               TRUE: Write request; FALSE: Read request.
  @param Offset              The starting byte offset to read from the device.
  @param BufferSize          The size in bytes of Buffer. The number of bytes to read from the device.
  @param Buffer              A pointer to the buffer for the data.
  @param Blocking            TRUE: Blocking request; FALSE: Non-blocking request.
  @param SharedWorkingBuffer The aligned buffer to hold the data for reading or writing.
  @param Subtasks            The subtask list header.

  @retval TRUE  The subtask list is created successfully.
  @retval FALSE The subtask list is not created.
**/
BOOLEAN
DiskIoCreateSubtaskList (
  IN DISK_IO_PRIVATE_DATA  *Instance,
  IN BOOLEAN               Write,
  IN UINT64                Offset,
  IN UINTN                 BufferSize,
  IN VOID                  *Buffer,
  IN BOOLEAN               Blocking,
  IN VOID                  *SharedWorkingBuffer,
  IN OUT LIST_ENTRY        *Subtasks
  )
{
  UINT32                BlockSize;
  UINT32                IoAlign;
  UINT64                Lba;
  UINT64                OverRunLba;
  UINT32                UnderRun;
  UINT32                OverRun;
  UINT8                 *BufferPtr;
  UINTN                 Length;
  UINTN                 DataBufferSize;
  DISK_IO_SUBTASK       *Subtask;
  VOID                  *WorkingBuffer;
  LIST_ENTRY            *Link;

  DEBUG ((EFI_D_BLKIO, "DiskIo: Create subtasks for task: Offset/BufferSize/Buffer = %016lx/%08x/%08x\n", Offset, BufferSize, Buffer));

  BlockSize = Instance->BlockIo->Media->BlockSize;
  IoAlign   = Instance->BlockIo->Media->IoAlign;
  if (IoAlign == 0) {
    IoAlign = 1;
  }

  Lba       = DivU64x32Remainder (Offset, BlockSize, &UnderRun);
  BufferPtr = (UINT8 *) Buffer;

  //
  // Special handling for zero BufferSize
  //
  if (BufferSize == 0) {
    Subtask = DiskIoCreateSubtask (Write, Lba, UnderRun, 0, NULL, BufferPtr, Blocking);
    if (Subtask == NULL) {
      goto Done;
    }
    InsertTailList (Subtasks, &Subtask->Link);
    return TRUE;
  }

  if (UnderRun != 0) {
    Length = MIN (BlockSize - UnderRun, BufferSize);
    if (Blocking) {
      WorkingBuffer = SharedWorkingBuffer;
    } else {
      WorkingBuffer = AllocateAlignedPages (EFI_SIZE_TO_PAGES (BlockSize), IoAlign);
      if (WorkingBuffer == NULL) {
        goto Done;
      }
    }
    if (Write) {
      //
      // A half write operation can be splitted to a blocking block-read and half write operation
      // This can simplify the sub task processing logic
      //
      Subtask = DiskIoCreateSubtask (FALSE, Lba, 0, BlockSize, NULL, WorkingBuffer, TRUE);
      if (Subtask == NULL) {
        goto Done;
      }
      InsertTailList (Subtasks, &Subtask->Link);
    }

    Subtask = DiskIoCreateSubtask (Write, Lba, UnderRun, Length, WorkingBuffer, BufferPtr, Blocking);
    if (Subtask == NULL) {
      goto Done;
    }
    InsertTailList (Subtasks, &Subtask->Link);

    BufferPtr  += Length;
    Offset     += Length;
    BufferSize -= Length;
    Lba ++;
  }

  OverRunLba  = Lba + DivU64x32Remainder (BufferSize, BlockSize, &OverRun);
  BufferSize -= OverRun;

  if (OverRun != 0) {
    if (Blocking) {
      WorkingBuffer = SharedWorkingBuffer;
    } else {
      WorkingBuffer = AllocateAlignedPages (EFI_SIZE_TO_PAGES (BlockSize), IoAlign);
      if (WorkingBuffer == NULL) {
        goto Done;
      }
    }
    if (Write) {
      //
      // A half write operation can be splitted to a blocking block-read and half write operation
      // This can simplify the sub task processing logic
      //
      Subtask = DiskIoCreateSubtask (FALSE, OverRunLba, 0, BlockSize, NULL, WorkingBuffer, TRUE);
      if (Subtask == NULL) {
        goto Done;
      }
      InsertTailList (Subtasks, &Subtask->Link);
    }

    Subtask = DiskIoCreateSubtask (Write, OverRunLba, 0, OverRun, WorkingBuffer, BufferPtr + BufferSize, Blocking);
    if (Subtask == NULL) {
      goto Done;
    }
    InsertTailList (Subtasks, &Subtask->Link);
  }

  if (OverRunLba > Lba) {
    //
    // If the DiskIo maps directly to a BlockIo device do the read.
    //
    if (ALIGN_POINTER (BufferPtr, IoAlign) == BufferPtr) {
      Subtask = DiskIoCreateSubtask (Write, Lba, 0, BufferSize, NULL, BufferPtr, Blocking);
      if (Subtask == NULL) {
        goto Done;
      }
      InsertTailList (Subtasks, &Subtask->Link);

      BufferPtr  += BufferSize;
      Offset     += BufferSize;
      BufferSize -= BufferSize;

    } else {
      if (Blocking) {
        //
        // Use the allocated buffer instead of the original buffer
        // to avoid alignment issue.
        //
        for (; Lba < OverRunLba; Lba += PcdGet32 (PcdDiskIoDataBufferBlockNum)) {
          DataBufferSize = MIN (BufferSize, PcdGet32 (PcdDiskIoDataBufferBlockNum) * BlockSize);

          Subtask = DiskIoCreateSubtask (Write, Lba, 0, DataBufferSize, SharedWorkingBuffer, BufferPtr, Blocking);
          if (Subtask == NULL) {
            goto Done;
          }
          InsertTailList (Subtasks, &Subtask->Link);

          BufferPtr  += DataBufferSize;
          Offset     += DataBufferSize;
          BufferSize -= DataBufferSize;
        }
      } else {
        WorkingBuffer = AllocateAlignedPages (EFI_SIZE_TO_PAGES (BufferSize), IoAlign);
        if (WorkingBuffer == NULL) {
          //
          // If there is not enough memory, downgrade to blocking access
          //
          DEBUG ((EFI_D_VERBOSE, "DiskIo: No enough memory so downgrade to blocking access\n"));
          if (!DiskIoCreateSubtaskList (Instance, Write, Offset, BufferSize, BufferPtr, TRUE, SharedWorkingBuffer, Subtasks)) {
            goto Done;
          }
        } else {
          Subtask = DiskIoCreateSubtask (Write, Lba, 0, BufferSize, WorkingBuffer, BufferPtr, Blocking);
          if (Subtask == NULL) {
            goto Done;
          }
          InsertTailList (Subtasks, &Subtask->Link);
        }

        BufferPtr  += BufferSize;
        Offset     += BufferSize;
        BufferSize -= BufferSize;
      }
    }
  }

  ASSERT (BufferSize == 0);

  return TRUE;

Done:
  //
  // Remove all the subtasks.
  //
  for (Link = GetFirstNode (Subtasks); !IsNull (Subtasks, Link); ) {
    Subtask = CR (Link, DISK_IO_SUBTASK, Link, DISK_IO_SUBTASK_SIGNATURE);
    Link = DiskIoDestroySubtask (Instance, Subtask);
  }
  return FALSE;
}

/**
  Terminate outstanding asynchronous requests to a device.

  @param This                   Indicates a pointer to the calling context.

  @retval EFI_SUCCESS           All outstanding requests were successfully terminated.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the cancel
                                operation.
**/
EFI_STATUS
EFIAPI
DiskIo2Cancel (
  IN EFI_DISK_IO2_PROTOCOL *This
  )
{
  DISK_IO_PRIVATE_DATA  *Instance;
  DISK_IO2_TASK         *Task;
  LIST_ENTRY            *Link;

  Instance = DISK_IO_PRIVATE_DATA_FROM_DISK_IO2 (This);

  EfiAcquireLock (&Instance->TaskQueueLock);

  for (Link = GetFirstNode (&Instance->TaskQueue)
    ; !IsNull (&Instance->TaskQueue, Link)
    ; Link = GetNextNode (&Instance->TaskQueue, Link)
    ) {
    Task = CR (Link, DISK_IO2_TASK, Link, DISK_IO2_TASK_SIGNATURE);

    if (Task->Token != NULL) {
      Task->Token->TransactionStatus = EFI_ABORTED;
      gBS->SignalEvent (Task->Token->Event);
      //
      // Set Token to NULL so that the further BlockIo2 responses will be ignored
      //
      Task->Token = NULL;
    }
  }

  EfiReleaseLock (&Instance->TaskQueueLock);

  return EFI_SUCCESS;
}

/**
  Remove the completed tasks from Instance->TaskQueue. Completed tasks are those who don't have any subtasks.

  @param Instance    Pointer to the DISK_IO_PRIVATE_DATA.

  @retval TRUE       The Instance->TaskQueue is empty after the completed tasks are removed.
  @retval FALSE      The Instance->TaskQueue is not empty after the completed tasks are removed.
**/
BOOLEAN
DiskIo2RemoveCompletedTask (
  IN DISK_IO_PRIVATE_DATA     *Instance
  )
{
  BOOLEAN                     QueueEmpty;
  LIST_ENTRY                  *Link;
  DISK_IO2_TASK               *Task;

  QueueEmpty = TRUE;

  EfiAcquireLock (&Instance->TaskQueueLock);
  for (Link = GetFirstNode (&Instance->TaskQueue); !IsNull (&Instance->TaskQueue, Link); ) {
    Task = CR (Link, DISK_IO2_TASK, Link, DISK_IO2_TASK_SIGNATURE);
    if (IsListEmpty (&Task->Subtasks)) {
      Link = RemoveEntryList (&Task->Link);
      ASSERT (Task->Token == NULL);
      FreePool (Task);
    } else {
      Link = GetNextNode (&Instance->TaskQueue, Link);
      QueueEmpty = FALSE;
    }
  }
  EfiReleaseLock (&Instance->TaskQueueLock);

  return QueueEmpty;
}

/**
  Common routine to access the disk.

  @param Instance    Pointer to the DISK_IO_PRIVATE_DATA.
  @param Write       TRUE: Write operation; FALSE: Read operation.
  @param MediaId     ID of the medium to access.
  @param Offset      The starting byte offset on the logical block I/O device to access.
  @param Token       A pointer to the token associated with the transaction.
                     If this field is NULL, synchronous/blocking IO is performed.
  @param  BufferSize            The size in bytes of Buffer. The number of bytes to read from the device.
  @param  Buffer                A pointer to the destination buffer for the data.
                                The caller is responsible either having implicit or explicit ownership of the buffer.
**/
EFI_STATUS
DiskIo2ReadWriteDisk (
  IN DISK_IO_PRIVATE_DATA     *Instance,
  IN BOOLEAN                  Write,
  IN UINT32                   MediaId,
  IN UINT64                   Offset,
  IN EFI_DISK_IO2_TOKEN       *Token,
  IN UINTN                    BufferSize,
  IN UINT8                    *Buffer
  )
{
  EFI_STATUS             Status;
  EFI_BLOCK_IO_PROTOCOL  *BlockIo;
  EFI_BLOCK_IO2_PROTOCOL *BlockIo2;
  EFI_BLOCK_IO_MEDIA     *Media;
  LIST_ENTRY             *Link;
  LIST_ENTRY             *NextLink;
  LIST_ENTRY             Subtasks;
  DISK_IO_SUBTASK        *Subtask;
  DISK_IO2_TASK          *Task;
  EFI_TPL                OldTpl;
  BOOLEAN                Blocking;
  BOOLEAN                SubtaskBlocking;
  LIST_ENTRY             *SubtasksPtr;

  Task      = NULL;
  BlockIo   = Instance->BlockIo;
  BlockIo2  = Instance->BlockIo2;
  Media     = BlockIo->Media;
  Status    = EFI_SUCCESS;
  Blocking  = (BOOLEAN) ((Token == NULL) || (Token->Event == NULL));

  if (Blocking) {
    //
    // Wait till pending async task is completed.
    //
    while (!DiskIo2RemoveCompletedTask (Instance));

    SubtasksPtr = &Subtasks;
  } else {
    DiskIo2RemoveCompletedTask (Instance);
    Task = AllocatePool (sizeof (DISK_IO2_TASK));
    if (Task == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }

    EfiAcquireLock (&Instance->TaskQueueLock);
    InsertTailList (&Instance->TaskQueue, &Task->Link);
    EfiReleaseLock (&Instance->TaskQueueLock);

    Task->Signature = DISK_IO2_TASK_SIGNATURE;
    Task->Instance  = Instance;
    Task->Token     = Token;
    EfiInitializeLock (&Task->SubtasksLock, TPL_NOTIFY);

    SubtasksPtr = &Task->Subtasks;
  }

  InitializeListHead (SubtasksPtr);
  if (!DiskIoCreateSubtaskList (Instance, Write, Offset, BufferSize, Buffer, Blocking, Instance->SharedWorkingBuffer, SubtasksPtr)) {
    if (Task != NULL) {
      FreePool (Task);
    }
    return EFI_OUT_OF_RESOURCES;
  }
  ASSERT (!IsListEmpty (SubtasksPtr));

  OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
  for ( Link = GetFirstNode (SubtasksPtr), NextLink = GetNextNode (SubtasksPtr, Link)
      ; !IsNull (SubtasksPtr, Link)
      ; Link = NextLink, NextLink = GetNextNode (SubtasksPtr, NextLink)
      ) {
    Subtask         = CR (Link, DISK_IO_SUBTASK, Link, DISK_IO_SUBTASK_SIGNATURE);
    Subtask->Task   = Task;
    SubtaskBlocking = Subtask->Blocking;

    ASSERT ((Subtask->Length % Media->BlockSize == 0) || (Subtask->Length < Media->BlockSize));

    if (Subtask->Write) {
      //
      // Write
      //
      if (Subtask->WorkingBuffer != NULL) {
        //
        // A sub task before this one should be a block read operation, causing the WorkingBuffer filled with the entire one block data.
        //
        CopyMem (Subtask->WorkingBuffer + Subtask->Offset, Subtask->Buffer, Subtask->Length);
      }

      if (SubtaskBlocking) {
        Status = BlockIo->WriteBlocks (
                            BlockIo,
                            MediaId,
                            Subtask->Lba,
                            (Subtask->Length % Media->BlockSize == 0) ? Subtask->Length : Media->BlockSize,
                            (Subtask->WorkingBuffer != NULL) ? Subtask->WorkingBuffer : Subtask->Buffer
                            );
      } else {
        Status = BlockIo2->WriteBlocksEx (
                             BlockIo2,
                             MediaId,
                             Subtask->Lba,
                             &Subtask->BlockIo2Token,
                             (Subtask->Length % Media->BlockSize == 0) ? Subtask->Length : Media->BlockSize,
                             (Subtask->WorkingBuffer != NULL) ? Subtask->WorkingBuffer : Subtask->Buffer
                             );
      }

    } else {
      //
      // Read
      //
      if (SubtaskBlocking) {
        Status = BlockIo->ReadBlocks (
                            BlockIo,
                            MediaId,
                            Subtask->Lba,
                            (Subtask->Length % Media->BlockSize == 0) ? Subtask->Length : Media->BlockSize,
                            (Subtask->WorkingBuffer != NULL) ? Subtask->WorkingBuffer : Subtask->Buffer
                            );
        if (!EFI_ERROR (Status) && (Subtask->WorkingBuffer != NULL)) {
          CopyMem (Subtask->Buffer, Subtask->WorkingBuffer + Subtask->Offset, Subtask->Length);
        }
      } else {
        Status = BlockIo2->ReadBlocksEx (
                             BlockIo2,
                             MediaId,
                             Subtask->Lba,
                             &Subtask->BlockIo2Token,
                             (Subtask->Length % Media->BlockSize == 0) ? Subtask->Length : Media->BlockSize,
                             (Subtask->WorkingBuffer != NULL) ? Subtask->WorkingBuffer : Subtask->Buffer
                             );
      }
    }

    if (SubtaskBlocking || EFI_ERROR (Status)) {
      //
      // Make sure the subtask list only contains non-blocking subtasks.
      // Remove failed non-blocking subtasks as well because the callback won't be called.
      //
      DiskIoDestroySubtask (Instance, Subtask);
    }

    if (EFI_ERROR (Status)) {
      break;
    }
  }

  gBS->RaiseTPL (TPL_NOTIFY);

  //
  // Remove all the remaining subtasks when failure.
  // We shouldn't remove all the tasks because the non-blocking requests have been submitted and cannot be canceled.
  //
  if (EFI_ERROR (Status)) {
    while (!IsNull (SubtasksPtr, NextLink)) {
      Subtask = CR (NextLink, DISK_IO_SUBTASK, Link, DISK_IO_SUBTASK_SIGNATURE);
      NextLink = DiskIoDestroySubtask (Instance, Subtask);
    }
  }

  //
  // It's possible that the non-blocking subtasks finish before raising TPL to NOTIFY,
  // so the subtasks list might be empty at this point.
  //
  if (!Blocking && IsListEmpty (SubtasksPtr)) {
    EfiAcquireLock (&Instance->TaskQueueLock);
    RemoveEntryList (&Task->Link);
    EfiReleaseLock (&Instance->TaskQueueLock);

    if (!EFI_ERROR (Status) && (Task->Token != NULL)) {
      //
      // Task->Token should be set to NULL by the DiskIo2OnReadWriteComplete
      // It it's not, that means the non-blocking request was downgraded to blocking request.
      //
      DEBUG ((EFI_D_VERBOSE, "DiskIo: Non-blocking request was downgraded to blocking request, signal event directly.\n"));
      Task->Token->TransactionStatus = Status;
      gBS->SignalEvent (Task->Token->Event);
    }

    FreePool (Task);
  }

  gBS->RestoreTPL (OldTpl);

  return Status;
}

/**
  Reads a specified number of bytes from a device.

  @param This                   Indicates a pointer to the calling context.
  @param MediaId                ID of the medium to be read.
  @param Offset                 The starting byte offset on the logical block I/O device to read from.
  @param Token                  A pointer to the token associated with the transaction.
                                If this field is NULL, synchronous/blocking IO is performed.
  @param  BufferSize            The size in bytes of Buffer. The number of bytes to read from the device.
  @param  Buffer                A pointer to the destination buffer for the data.
                                The caller is responsible either having implicit or explicit ownership of the buffer.

  @retval EFI_SUCCESS           If Event is NULL (blocking I/O): The data was read correctly from the device.
                                If Event is not NULL (asynchronous I/O): The request was successfully queued for processing.
                                                                         Event will be signaled upon completion.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  @retval EFI_NO_MEDIA          There is no medium in the device.
  @retval EFI_MEDIA_CHNAGED     The MediaId is not for the current medium.
  @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not valid for the device.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.

**/
EFI_STATUS
EFIAPI
DiskIo2ReadDiskEx (
  IN EFI_DISK_IO2_PROTOCOL        *This,
  IN UINT32                       MediaId,
  IN UINT64                       Offset,
  IN OUT EFI_DISK_IO2_TOKEN       *Token,
  IN UINTN                        BufferSize,
  OUT VOID                        *Buffer
  )
{
  return DiskIo2ReadWriteDisk (
           DISK_IO_PRIVATE_DATA_FROM_DISK_IO2 (This),
           FALSE, MediaId, Offset, Token, BufferSize, (UINT8 *) Buffer
           );
}

/**
  Writes a specified number of bytes to a device.

  @param This        Indicates a pointer to the calling context.
  @param MediaId     ID of the medium to be written.
  @param Offset      The starting byte offset on the logical block I/O device to write to.
  @param Token       A pointer to the token associated with the transaction.
                     If this field is NULL, synchronous/blocking IO is performed.
  @param BufferSize  The size in bytes of Buffer. The number of bytes to write to the device.
  @param Buffer      A pointer to the buffer containing the data to be written.

  @retval EFI_SUCCESS           If Event is NULL (blocking I/O): The data was written correctly to the device.
                                If Event is not NULL (asynchronous I/O): The request was successfully queued for processing.
                                                                         Event will be signaled upon completion.
  @retval EFI_WRITE_PROTECTED   The device cannot be written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write operation.
  @retval EFI_NO_MEDIA          There is no medium in the device.
  @retval EFI_MEDIA_CHNAGED     The MediaId is not for the current medium.
  @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not valid for the device.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.

**/
EFI_STATUS
EFIAPI
DiskIo2WriteDiskEx (
  IN EFI_DISK_IO2_PROTOCOL        *This,
  IN UINT32                       MediaId,
  IN UINT64                       Offset,
  IN OUT EFI_DISK_IO2_TOKEN       *Token,
  IN UINTN                        BufferSize,
  IN VOID                         *Buffer
  )
{
  return DiskIo2ReadWriteDisk (
           DISK_IO_PRIVATE_DATA_FROM_DISK_IO2 (This),
           TRUE, MediaId, Offset, Token, BufferSize, (UINT8 *) Buffer
           );
}

/**
  The callback for the BlockIo2 FlushBlocksEx.
  @param  Event                 Event whose notification function is being invoked.
  @param  Context               The pointer to the notification function's context,
                                which points to the DISK_IO2_FLUSH_TASK instance.
**/
VOID
EFIAPI
DiskIo2OnFlushComplete (
  IN EFI_EVENT                 Event,
  IN VOID                      *Context
  )
{
  DISK_IO2_FLUSH_TASK             *Task;

  gBS->CloseEvent (Event);

  Task = (DISK_IO2_FLUSH_TASK *) Context;
  ASSERT (Task->Signature == DISK_IO2_FLUSH_TASK_SIGNATURE);
  Task->Token->TransactionStatus = Task->BlockIo2Token.TransactionStatus;
  gBS->SignalEvent (Task->Token->Event);

  FreePool (Task);
}

/**
  Flushes all modified data to the physical device.

  @param This        Indicates a pointer to the calling context.
  @param Token       A pointer to the token associated with the transaction.
                     If this field is NULL, synchronous/blocking IO is performed.

  @retval EFI_SUCCESS           If Event is NULL (blocking I/O): The data was flushed successfully to the device.
                                If Event is not NULL (asynchronous I/O): The request was successfully queued for processing.
                                                                         Event will be signaled upon completion.
  @retval EFI_WRITE_PROTECTED   The device cannot be written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write operation.
  @retval EFI_NO_MEDIA          There is no medium in the device.
  @retval EFI_OUT_OF_RESOURCES  The request could not be completed due to a lack of resources.
**/
EFI_STATUS
EFIAPI
DiskIo2FlushDiskEx (
  IN EFI_DISK_IO2_PROTOCOL        *This,
  IN OUT EFI_DISK_IO2_TOKEN       *Token
  )
{
  EFI_STATUS                      Status;
  DISK_IO2_FLUSH_TASK             *Task;
  DISK_IO_PRIVATE_DATA            *Private;

  Private = DISK_IO_PRIVATE_DATA_FROM_DISK_IO2 (This);

  if ((Token != NULL) && (Token->Event != NULL)) {
    Task = AllocatePool (sizeof (DISK_IO2_FLUSH_TASK));
    if (Task == NULL) {
      return EFI_OUT_OF_RESOURCES;
    }

    Status = gBS->CreateEvent (
                    EVT_NOTIFY_SIGNAL,
                    TPL_CALLBACK,
                    DiskIo2OnFlushComplete,
                    Task,
                    &Task->BlockIo2Token.Event
                    );
    if (EFI_ERROR (Status)) {
      FreePool (Task);
      return Status;
    }
    Task->Signature = DISK_IO2_FLUSH_TASK_SIGNATURE;
    Task->Token     = Token;
    Status = Private->BlockIo2->FlushBlocksEx (Private->BlockIo2, &Task->BlockIo2Token);
    if (EFI_ERROR (Status)) {
      gBS->CloseEvent (Task->BlockIo2Token.Event);
      FreePool (Task);
    }
  } else {
    Status = Private->BlockIo2->FlushBlocksEx (Private->BlockIo2, NULL);
  }

  return Status;
}

/**
  Read BufferSize bytes from Offset into Buffer.
  Reads may support reads that are not aligned on
  sector boundaries. There are three cases:
    UnderRun - The first byte is not on a sector boundary or the read request is
               less than a sector in length.
    Aligned  - A read of N contiguous sectors.
    OverRun  - The last byte is not on a sector boundary.

  @param  This                  Protocol instance pointer.
  @param  MediaId               Id of the media, changes every time the media is replaced.
  @param  Offset                The starting byte offset to read from
  @param  BufferSize            Size of Buffer
  @param  Buffer                Buffer containing read data

  @retval EFI_SUCCESS           The data was read correctly from the device.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the read.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
  @retval EFI_INVALID_PARAMETER The read request contains device addresses that are not
                                valid for the device.

**/
EFI_STATUS
EFIAPI
DiskIoReadDisk (
  IN EFI_DISK_IO_PROTOCOL  *This,
  IN UINT32                MediaId,
  IN UINT64                Offset,
  IN UINTN                 BufferSize,
  OUT VOID                 *Buffer
  )
{
  return DiskIo2ReadWriteDisk (
           DISK_IO_PRIVATE_DATA_FROM_DISK_IO (This),
           FALSE, MediaId, Offset, NULL, BufferSize, (UINT8 *) Buffer
           );
}


/**
  Writes BufferSize bytes from Buffer into Offset.
  Writes may require a read modify write to support writes that are not
  aligned on sector boundaries. There are three cases:
    UnderRun - The first byte is not on a sector boundary or the write request
               is less than a sector in length. Read modify write is required.
    Aligned  - A write of N contiguous sectors.
    OverRun  - The last byte is not on a sector boundary. Read modified write
               required.

  @param  This       Protocol instance pointer.
  @param  MediaId    Id of the media, changes every time the media is replaced.
  @param  Offset     The starting byte offset to read from
  @param  BufferSize Size of Buffer
  @param  Buffer     Buffer containing read data

  @retval EFI_SUCCESS           The data was written correctly to the device.
  @retval EFI_WRITE_PROTECTED   The device can not be written to.
  @retval EFI_DEVICE_ERROR      The device reported an error while performing the write.
  @retval EFI_NO_MEDIA          There is no media in the device.
  @retval EFI_MEDIA_CHNAGED     The MediaId does not matched the current device.
  @retval EFI_INVALID_PARAMETER The write request contains device addresses that are not
                                 valid for the device.

**/
EFI_STATUS
EFIAPI
DiskIoWriteDisk (
  IN EFI_DISK_IO_PROTOCOL  *This,
  IN UINT32                MediaId,
  IN UINT64                Offset,
  IN UINTN                 BufferSize,
  IN VOID                  *Buffer
  )
{
  return DiskIo2ReadWriteDisk (
           DISK_IO_PRIVATE_DATA_FROM_DISK_IO (This),
           TRUE, MediaId, Offset, NULL, BufferSize, (UINT8 *) Buffer
           );
}

/**
  The user Entry Point for module DiskIo. The user code starts with this function.

  @param[in] ImageHandle    The firmware allocated handle for the EFI image.
  @param[in] SystemTable    A pointer to the EFI System Table.

  @retval EFI_SUCCESS       The entry point is executed successfully.
  @retval other             Some error occurs when executing this entry point.

**/
EFI_STATUS
EFIAPI
InitializeDiskIo (
  IN EFI_HANDLE           ImageHandle,
  IN EFI_SYSTEM_TABLE     *SystemTable
  )
{
  EFI_STATUS              Status;

  //
  // Install driver model protocol(s).
  //
  Status = EfiLibInstallDriverBindingComponentName2 (
             ImageHandle,
             SystemTable,
             &gDiskIoDriverBinding,
             ImageHandle,
             &gDiskIoComponentName,
             &gDiskIoComponentName2
             );
  ASSERT_EFI_ERROR (Status);

  return Status;
}